https://hydraulicvalvelocation.com Tue, 14 Jul 2026 06:36:40 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://hydraulicvalvelocation.com/2026/06/10/hydraulic-valve-directional-control-valve-spool-double-valve-loader-trailer/ https://hydraulicvalvelocation.com/2026/06/10/hydraulic-valve-directional-control-valve-spool-double-valve-loader-trailer/#comments Wed, 10 Jun 2026 05:03:05 +0000 https://hydraulicvalvelocation.com/2026/06/10/hydraulic-valve-directional-control-valve-spool-double-valve-loader-trailer/
























SPRING RETURN: All spools are equipped with spring return, which can be reset to the neutral position by gently shaking, simple and convenient in operation. DOUBLE ACTING: This hydraulic control valve is used to operate double acting oil cylinder, with a nominal diameter of 12mm and a nominal pressure of 16.20MPa. PARALLEL OIL LINE: Adopting parallel oil circuit, manual control, connected to other hydraulic components through pressure output port, providing power source. APPLICABLE VEHICLE: This control valve is widely used in forklifts, sanitation vehicles, small loaders, trailers and other hydraulic systems of construction machinery. EXCELLENT MATERIAL: The hydraulic control valve is made of excellent cast iron material, with high hardness, impact resistance, and has a long service life. Item Type: Hydraulic Valve Model: P40-OT Material: Cast Iron Function: A, O, Y, P, etc. Application Scene: Widely used in forklift, sanitation vehicle, small loader, trailer and other construction machinery hydraulic system. Applicable Medium: Oil Applicable Temperature: -20-80? Nominal Diameter: Approx. 12mm / 0.47in Nominal Pressure: 16.20MPa. 1 x Hydraulic Valve. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

]]> https://hydraulicvalvelocation.com/2026/06/10/hydraulic-valve-directional-control-valve-spool-double-valve-loader-trailer/feed/ 0 https://hydraulicvalvelocation.com/2025/08/05/8-bank-hydraulic-directional-valve-for-forest-crane-logging-trailer-90l-2xjoy-ex/ https://hydraulicvalvelocation.com/2025/08/05/8-bank-hydraulic-directional-valve-for-forest-crane-logging-trailer-90l-2xjoy-ex/#comments Wed, 06 Aug 2025 04:33:41 +0000 https://hydraulicvalvelocation.com/2025/08/05/8-bank-hydraulic-directional-valve-for-forest-crane-logging-trailer-90l-2xjoy-ex/




NOTE: We issue VAT invoices for countries in the European Union. The distributor is adapted to different machine types, such as B. Forest machines, tractors, field sprayers, rotors, HDS loaders, construction machines, loaders, excavators, sweepers, industrial machines and other hydraulically controlled devices. Recommended system oil flow: 0 – 90l / min. Control example: eight double-acting cylinders. Can be connected in series to an existing system (pressure sleeve required). Recommended system oil flow: 0 – 90 l / min. Example control: 2-sided drive. Both joysticks with five positions (1 – 2 – 0 – 3 – 4) are spring-loaded, i. You return to the vertical yourself. Position 0 neutral (vertical joystick) piston rods of both cylinders are stationary – oil flows to the overflow. Working position 1 (joystick lever in forward position) The piston rod of the first cylinder extends. Working position 2 (joystick lever tilted backwards) The piston rod of the first cylinder retracts. Working position 3 (joystick lever inclined to the left) The piston rod of the second cylinder extends. Working position 4 (joystick lever inclined to the right) The piston rod of the second cylinder retracts. All three position levers (1 – 0 – 2) are spring loaded, i. Position 0 neutral (lever in vertical position) cylinder piston rod is stationary – oil overflows. Working position 1 (lever in forward position) The cylinder piston extends. The 2 working position (lever backwards) of the piston rod of the cylinder retracts. The lever can be positioned parallel or perpendicular to the joysticks. Pump supply (P): BSP 1 / 2“internal thread return to the tank (T): BSP 3 / 4”internal thread section outlet (A, B): BSP 1 / 2”internal thread. Maximum inlet pressure: 250 bar Maximum return pressure: 50 bar Maximum pressure on the sections: 300 bar. Factory set relief valve to 175Bar Self-adjusting, full rotation, change by 30Bar.

]]> https://hydraulicvalvelocation.com/2025/08/05/8-bank-hydraulic-directional-valve-for-forest-crane-logging-trailer-90l-2xjoy-ex/feed/ 0 https://hydraulicvalvelocation.com/2025/05/12/7-bank-hydraulic-directional-valve-for-forest-crane-logging-trailer-90l-2xjoy-ex/ https://hydraulicvalvelocation.com/2025/05/12/7-bank-hydraulic-directional-valve-for-forest-crane-logging-trailer-90l-2xjoy-ex/#comments Tue, 13 May 2025 01:50:40 +0000 https://hydraulicvalvelocation.com/2025/05/12/7-bank-hydraulic-directional-valve-for-forest-crane-logging-trailer-90l-2xjoy-ex/




NOTE: We issue VAT invoices for countries in the European Union. 7 Bank Hydraulic Directional Valve for Forest Crane Logging Trailer 90L 2xJoy. The distributor is adapted to different machine types, such as B. Forest machines, tractors, field sprayers, rotors, HDS loaders, construction machines, loaders, excavators, sweepers, industrial machines and other hydraulically controlled devices. Recommended system oil flow: 0 – 90l / min. Control example: eight double-acting cylinders. Can be connected in series to an existing system (pressure sleeve required). Recommended system oil flow: 0 – 90 l / min. Example control: 2-sided drive. Both joysticks with five positions (1 – 2 – 0 – 3 – 4) are spring-loaded, i. You return to the vertical yourself. Position 0 neutral (vertical joystick) piston rods of both cylinders are stationary – oil flows to the overflow. Working position 1 (joystick lever in forward position) The piston rod of the first cylinder extends. Working position 2 (joystick lever tilted backwards) The piston rod of the first cylinder retracts. Working position 3 (joystick lever inclined to the left) The piston rod of the second cylinder extends. Working position 4 (joystick lever inclined to the right) The piston rod of the second cylinder retracts. All three position levers (1 – 0 – 2) are spring loaded, i. Position 0 neutral (lever in vertical position) cylinder piston rod is stationary – oil overflows. Working position 1 (lever in forward position) The cylinder piston extends. The 2 working position (lever backwards) of the piston rod of the cylinder retracts. The lever can be positioned parallel or perpendicular to the joysticks. Pump supply (P): BSP 1 / 2“internal thread return to the tank (T): BSP 3 / 4”internal thread section outlet (A, B): BSP 1 / 2”internal thread. Maximum inlet pressure: 250 bar Maximum return pressure: 50 bar Maximum pressure on the sections: 300 bar. Factory set relief valve to 175Bar Self-adjusting, full rotation, change by 30Bar.

]]> https://hydraulicvalvelocation.com/2025/05/12/7-bank-hydraulic-directional-valve-for-forest-crane-logging-trailer-90l-2xjoy-ex/feed/ 0 https://hydraulicvalvelocation.com/2024/12/28/7-bank-hydraulic-directional-valve-for-forest-crane-logging-trailer-90l-2xjoy/ https://hydraulicvalvelocation.com/2024/12/28/7-bank-hydraulic-directional-valve-for-forest-crane-logging-trailer-90l-2xjoy/#comments Sat, 28 Dec 2024 18:20:00 +0000 https://hydraulicvalvelocation.com/2024/12/28/7-bank-hydraulic-directional-valve-for-forest-crane-logging-trailer-90l-2xjoy/




NOTE: We issue VAT invoices for countries in the European Union. 7 Bank Hydraulic Directional Valve for Forest Crane Logging Trailer 90L 2xJoy. The distributor is adapted to different machine types, such as B. Forest machines, tractors, field sprayers, rotors, HDS loaders, construction machines, loaders, excavators, sweepers, industrial machines and other hydraulically controlled devices. Recommended system oil flow: 0 – 90l / min. Control example: eight double-acting cylinders. Can be connected in series to an existing system (pressure sleeve required). Recommended system oil flow: 0 – 90 l / min. Example control: 2-sided drive. Both joysticks with five positions (1 – 2 – 0 – 3 – 4) are spring-loaded, i. You return to the vertical yourself. Position 0 neutral (vertical joystick) piston rods of both cylinders are stationary – oil flows to the overflow. Working position 1 (joystick lever in forward position) The piston rod of the first cylinder extends. Working position 2 (joystick lever tilted backwards) The piston rod of the first cylinder retracts. Working position 3 (joystick lever inclined to the left) The piston rod of the second cylinder extends. Working position 4 (joystick lever inclined to the right) The piston rod of the second cylinder retracts. All three position levers (1 – 0 – 2) are spring loaded, i. Position 0 neutral (lever in vertical position) cylinder piston rod is stationary – oil overflows. Working position 1 (lever in forward position) The cylinder piston extends. The 2 working position (lever backwards) of the piston rod of the cylinder retracts. The lever can be positioned parallel or perpendicular to the joysticks. Pump supply (P): BSP 1 / 2“internal thread return to the tank (T): BSP 3 / 4”internal thread section outlet (A, B): BSP 1 / 2”internal thread. Maximum inlet pressure: 250 bar Maximum return pressure: 50 bar Maximum pressure on the sections: 300 bar. Factory set relief valve to 175Bar Self-adjusting, full rotation, change by 30Bar.

]]> https://hydraulicvalvelocation.com/2024/12/28/7-bank-hydraulic-directional-valve-for-forest-crane-logging-trailer-90l-2xjoy/feed/ 0 https://hydraulicvalvelocation.com/2023/08/17/low-bridge-parked-on-double-yellow-lines-blower-trailer/ https://hydraulicvalvelocation.com/2023/08/17/low-bridge-parked-on-double-yellow-lines-blower-trailer/#comments Thu, 17 Aug 2023 14:57:51 +0000 https://hydraulicvalvelocation.com/2023/08/17/low-bridge-parked-on-double-yellow-lines-blower-trailer/ ]]> https://hydraulicvalvelocation.com/2023/08/17/low-bridge-parked-on-double-yellow-lines-blower-trailer/feed/ 0 https://hydraulicvalvelocation.com/2022/08/01/8-bank-hydraulic-directional-valve-for-forest-crane-logging-trailer-90l-2x-joy-2/ https://hydraulicvalvelocation.com/2022/08/01/8-bank-hydraulic-directional-valve-for-forest-crane-logging-trailer-90l-2x-joy-2/#comments Mon, 01 Aug 2022 07:05:01 +0000 https://hydraulicvalvelocation.com/2022/08/01/8-bank-hydraulic-directional-valve-for-forest-crane-logging-trailer-90l-2x-joy-2/




NOTE: We issue VAT invoices for countries in the European Union. The distributor is adapted to different machine types, such as B. Forest machines, tractors, field sprayers, rotors, HDS loaders, construction machines, loaders, excavators, sweepers, industrial machines and other hydraulically controlled devices. Recommended system oil flow: 0 – 90l / min. Control example: eight double-acting cylinders. Can be connected in series to an existing system (pressure sleeve required). Recommended system oil flow: 0 – 90 l / min. Example control: 2-sided drive. Both joysticks with five positions (1 – 2 – 0 – 3 – 4) are spring-loaded, i. You return to the vertical yourself. Position 0 neutral (vertical joystick) piston rods of both cylinders are stationary – oil flows to the overflow. Working position 1 (joystick lever in forward position) The piston rod of the first cylinder extends. Working position 2 (joystick lever tilted backwards) The piston rod of the first cylinder retracts. Working position 3 (joystick lever inclined to the left) The piston rod of the second cylinder extends. Working position 4 (joystick lever inclined to the right) The piston rod of the second cylinder retracts. All three position levers (1 – 0 – 2) are spring loaded, i. Position 0 neutral (lever in vertical position) cylinder piston rod is stationary – oil overflows. Working position 1 (lever in forward position) The cylinder piston extends. The 2 working position (lever backwards) of the piston rod of the cylinder retracts. The lever can be positioned parallel or perpendicular to the joysticks. Pump supply (P): BSP 1 / 2“internal thread return to the tank (T): BSP 3 / 4”internal thread section outlet (A, B): BSP 1 / 2”internal thread. Maximum inlet pressure: 250 bar Maximum return pressure: 50 bar Maximum pressure on the sections: 300 bar. Factory set relief valve to 175Bar Self-adjusting, full rotation, change by 30Bar. This item is in the category “Business, Office & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Valves & Manifolds\Directional Control Valves\Spool Valves”. The seller is “hydraulic-center” and is located in this country: PL.

• Suitable Media: Oil
• Connection diameter: 3/4 in 1/2 in
• Manufacturer number: SD8
• Spool Count: 8-Spool
• Valve Operation: Manual
• Maximum Pressure: 4500 psi
• Brand: Perfect Hydraulic
• Maximum Flow Rate: 25 gpm

]]> https://hydraulicvalvelocation.com/2022/08/01/8-bank-hydraulic-directional-valve-for-forest-crane-logging-trailer-90l-2x-joy-2/feed/ 0 https://hydraulicvalvelocation.com/2021/10/15/full-tour-of-our-cargo-trailer-conversion/ https://hydraulicvalvelocation.com/2021/10/15/full-tour-of-our-cargo-trailer-conversion/#comments Fri, 15 Oct 2021 13:28:34 +0000 http://hydraulicvalvelocation.com/2021/10/15/full-tour-of-our-cargo-trailer-conversion/ ]]> https://hydraulicvalvelocation.com/2021/10/15/full-tour-of-our-cargo-trailer-conversion/feed/ 0 https://hydraulicvalvelocation.com/2021/02/08/8-bank-hydraulic-directional-valve-for-forest-crane-logging-trailer-90l-2x-joy/ https://hydraulicvalvelocation.com/2021/02/08/8-bank-hydraulic-directional-valve-for-forest-crane-logging-trailer-90l-2x-joy/#comments Tue, 09 Feb 2021 03:19:42 +0000 http://hydraulicvalvelocation.com/2021/02/08/8-bank-hydraulic-directional-valve-for-forest-crane-logging-trailer-90l-2x-joy/




NOTE: We issue VAT invoices for countries in the European Union. The distributor is adapted to different machine types, such as B. Forest machines, tractors, field sprayers, rotors, HDS loaders, construction machines, loaders, excavators, sweepers, industrial machines and other hydraulically controlled devices. Recommended system oil flow: 0 – 90l / min. Control example: eight double-acting cylinders. Can be connected in series to an existing system (pressure sleeve required). Recommended system oil flow: 0 – 90 l / min. Example control: 2-sided drive. Both joysticks with five positions (1 – 2 – 0 – 3 – 4) are spring-loaded, i. You return to the vertical yourself. Position 0 neutral (vertical joystick) piston rods of both cylinders are stationary – oil flows to the overflow. Working position 1 (joystick lever in forward position) The piston rod of the first cylinder extends. Working position 2 (joystick lever tilted backwards) The piston rod of the first cylinder retracts. Working position 3 (joystick lever inclined to the left) The piston rod of the second cylinder extends. Working position 4 (joystick lever inclined to the right) The piston rod of the second cylinder retracts. All three position levers (1 – 0 – 2) are spring loaded, i. Position 0 neutral (lever in vertical position) cylinder piston rod is stationary – oil overflows. Working position 1 (lever in forward position) The cylinder piston extends. The 2 working position (lever backwards) of the piston rod of the cylinder retracts. The lever can be positioned parallel or perpendicular to the joysticks. Pump supply (P): BSP 1 / 2“internal thread return to the tank (T): BSP 3 / 4”internal thread section outlet (A, B): BSP 1 / 2”internal thread. Maximum inlet pressure: 250 bar Maximum return pressure: 50 bar Maximum pressure on the sections: 300 bar. Factory set relief valve to 175Bar Self-adjusting, full rotation, change by 30Bar. The item “8 Bank Hydraulic Directional Valve for Forest Crane Logging Trailer 90L 2x Joy” is in sale since Sunday, January 31, 2021. This item is in the category “Business, Office & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Valves & Manifolds\Directional Control Valves\Spool Valves”. The seller is “hydraulic-center” and is located in Torun. This item can be shipped to all countries in Europe.

• Suitable Media: Oil
• Connection diameter: 3/4 in 1/2 in
• Manufacturer Part Number: Non applicable
• Manufacturer number: SD8
• Spool Count: 8-Spool
• MPN: Not Applicable
• Valve Operation: Manual
• Maximum Pressure: 4500 psi
• Brand: Perfect Hydraulic
• Maximum Flow Rate: 25 gpm

]]> https://hydraulicvalvelocation.com/2021/02/08/8-bank-hydraulic-directional-valve-for-forest-crane-logging-trailer-90l-2x-joy/feed/ 0