Hydraulic Valve Direction

1x Floating 2 Bank Hydraulic Directional Control Valve 21gpm 80L cable kit June 4, 2024

NOTE: We issue VAT invoices for countries in the European Union. Hand control valve Hand lever valve hydraulic 80L / min 2-fold for 1x double-acting cylinder. Controlled with the Bowden cables. It is widely used in hydraulic systems in agriculture, horticulture, forestry, construction, and broader industry. The distributor is adapted to different types of machines, such as B. Agricultural machines, tractors, sprayers, round vehicles, cyclo-loaders, HDS loaders, construction machinery, loaders, excavators, sweepers, industrial machines and other hydraulically controlled devices. Recommended system oil flow: 0 – 80 l / min. Example control: 2-sided drive. Can be connected in series to an existing system (pressure sleeve required). Three-position lever (1 – 0 – 2), spring-loaded, ie it moves back into the vertical position. Neutral position 0 (lever up), piston rod of the hydraulic cylinder is stationary – oil overflows. Working position 1 (lever up), the piston rod of the hydraulic cylinder slides out. Working position 2 (lever up), the piston rod of the hydraulic cylinder retracts. Four-position lever (1 – 0 – 2 – 3), three positions (1 – 0 – 2) on spring (lever goes back to vertical position), position (3) on spring clip (lever stops in floating position). Position 0 neutral (lever in vertical position) The actuator piston rod is stationary – oil overflows. Position 1 (lever in front inclined position) The cylinder piston rod slides out. Position 2 (lever in diagonal reverse position) the piston rod retracts. Position 3 floating with latch (lever in maximum forward position) The piston rod loosens, pulls out and moves in freely under the action of force. Pump supply (P): female thread BSP 1/2′. Return to tank (T): female thread BSP 3/4. Output for sections (A, B): Female thread BSP 1/2. Series connection (N): Female thread BSP 3/4. Maximum inlet pressure: 250bar Maximum return pressure: 50bar Maximum pressure on sections: 300bar. Factory-set overflow valve to 175 bar Self-adjusting, full turn, change by 30 bar. Wide lever configuration options (examples in picture). Recommended oil temperature range. Permissible ambient temperature: -40 ° C to +60 ° C Permissible oil temperature: -15 ° C to +80 ° C.

Comments Off

Tags: 21gpm, bank, cable, control, directional, floating, hydraulic, valve

Categories: floating

New OEM REXROTH 4WE 6 D62/EG24N9K4/ZV Solenoid Directional Hydraulic Valve June 3, 2024

New OEM REXROTH 4WE 6 D62/EG24N9K4/ZV Solenoid Directional Hydraulic Valve..

Comments Off

Tags: d62eg24n9k4zv, directional, hydraulic, rexroth, solenoid, valve

Categories: rexroth

2 Bank Hydraulic Directional Control Valve JOYSTICK 11gpm 40L double acting ex

NOTE: We also issue VAT invoices on request. HYDRAULIC DISTRIBUTOR 2 SECTION P40. CONTROL BY BUILT-IN JOYSTICK. Symbol: 02P40 A1A1 + JOY. It is widely used in hydraulic systems in agriculture, horticulture, forestry, construction, and well-known industries. The distributor is adapted to different types of machines, such as B. Agricultural machines, tractors, sprayers, round vehicles, cyclo-loaders, HDS loaders, construction machinery, loaders, excavators, sweepers, industrial machines and other hydraulically controlled devices. Recommended oil flow: 0 – 40 l / min. Example control: two 2-way drives. Possibility of serial connection to the existing system (pressure sleeve required). Joystick with five positions (1 – 2 – 0 – 3 – 4) on the spring, i. Position 0 neutral (joystick positioned vertically) piston rods of both drives are stationary – oil overflows. Working position 1 (joystick lever tilted forward) The piston rod of the first actuator extends. Working position 2 (joystick lever in an inclined position) The piston rod of the first drive is retracted. Working position 3 (joystick lever inclined to the left) The piston rod of the other drive extends. Working position 4 (joystick lever inclined to the right) The piston rod of the other drive is retracted. Pump supply (P1, P2): BSP 1/2 internal thread. Back to the tank (T1, T2): BSP 1/2 internal thread. Sections (A1, A2; B1, B2): BSP 3/8 internal thread. Serial connection (N): BSP 1/2 internal thread. Maximum pressure on the supply: 250bar. Maximum return pressure: 50 bar. Maximum pressure on the sections: 300 bar. The overflow valve is factory-set to 175 bar. Possibility of self-regulation, full turnover change by 30bar.

Comments Off

Tags: 11gpm, acting, bank, control, directional, double, hydraulic, joystick, valve

Categories: bank

1xSINGLE ACTING 4 Spool Hydraulic Directional Valve 2xJOYSTICK 11gpm 40L 1xSA ex June 2, 2024

NOTE: We issue VAT invoices for countries in the European Union. HYDRAULIC DISTRIBUTOR 4 SECTION P40 3x Double Acting. CONTROL BY BUILT-IN JOYSTICK x2. Symbol: 04P40 A1A1A1C1 + 2x JOY. It is widely used in hydraulic systems in agriculture, horticulture, forestry, construction, and well-known industries. The distributor is adapted to different types of machines, such as B. Agricultural machines, tractors, sprayers, round vehicles, cyclo-loaders, HDS loaders, construction machinery, loaders, excavators, sweepers, industrial machines and other hydraulically controlled devices. Recommended oil flow: 0 – 40 l / min. Example control: two 2-way drives. Possibility of serial connection to the existing system (pressure sleeve required). Joystick with five positions (1 – 2 – 0 – 3 – 4) on the spring, i. Position 0 neutral (joystick positioned vertically) piston rods of both drives are stationary – oil overflows. Working position 1 (joystick lever tilted forward) The piston rod of the first actuator extends. Working position 2 (joystick lever in an inclined position) The piston rod of the first drive is retracted. Working position 3 (joystick lever inclined to the left) The piston rod of the other drive extends. Working position 4 (joystick lever inclined to the right) The piston rod of the other drive is retracted. Pump supply (P1, P2): BSP 1/2 internal thread. Back to the tank (T1, T2): BSP 1/2 internal thread. Sections (A1, A2; B1, B2): BSP 3/8 internal thread. Serial connection (N): BSP 1/2 internal thread. Maximum pressure on the supply: 250bar. Maximum return pressure: 50 bar. Maximum pressure on the sections: 300 bar. The overflow valve is factory-set to 175 bar. Possibility of self-regulation, full turnover change by 30bar.

Comments Off

Tags: 11gpm, 1xsa, 1xsingle, 2xjoystick, acting, directional, hydraulic, spool, valve

Categories: 1xsingle

2 Bank Hydraulic Directional Control Valve 21gpm 80L cable kit 2x Double ex

NOTE: We issue VAT invoices for countries in the European Union. Hand control valve Hand lever valve hydraulic 80L / min 2-fold for double-acting cylinders controlled with the Bowden cables. It is widely used in hydraulic systems in agriculture, horticulture, forestry, construction, and broader industry. The distributor is adapted to different types of machines, such as B. Agricultural machines, tractors, sprayers, round vehicles, cyclo-loaders, HDS loaders, construction machinery, loaders, excavators, sweepers, industrial machines and other hydraulically controlled devices. Recommended oil flow in the system: 0-80L / min. Control example: double-acting hydraulic cylinder. Possibility of series connection to the existing system (requires connection of a pressure sleeve). Five-digit joystick (1 – 2 – 0 – 3 – 4), spring-loaded, ie it moves back to the vertical position by itself. Position 0 neutral (vertical joystick) piston rod of both cylinders is stationary – oil overflows. Position 1 (joystick lever in an inclined position) The piston rod of the first cylinder slides out. Position 2 (joystick lever in diagonal reverse position) The piston rod of the first cylinder retracts. Position 3 (joystick lever at an angle to the left) The piston rod of the second cylinder slides out. Position 4 (joystick lever at an angle to the right) second piston rod retracts. Pump supply (P): female thread BSP 1/2 (or 3/4 we get different versions). Return to tank (T): female thread BSP 3/4. Output for sections (A, B): Female thread BSP 1/2. Series connection (N): Female thread BSP 3/4. Pressure range Maximum supply pressure: 250 bar. Maximum return pressure: 50 bar. Maximum pressure in sections: 300bar. Bypass valve (safety) set at the factory to 175 bar. Self-adjusting, full turn 30 bar displacement. Permissible ambient temperature: 40 ° C to + 60 ° C. Permissible oil temperature: 15 ° C to + 80 ° C. Dimensions can be changed slightly.

Comments Off

Tags: 21gpm, bank, cable, control, directional, double, hydraulic, valve

Categories: bank

2 x Single Acting 2 BANK Hydraulic Directional Control Valve 11gpm 40L 2x SA June 1, 2024

NOTE: We issue VAT invoices for countries in the European Union. 2 Spool Hydraulic Directional Control Valve 11gpm 40L 2 x Single Acting Cylinder. Hydraulic distributors are guaranteed for 2 years. It is used in hydraulic systems in agriculture, horticulture, forestry, construction and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, front loaders, construction machines, loaders, excavators, sweepers, industrial machines and for other applications hydraulically controlled. Recommended oil flow in the system: 0-40L / min. Control example: double-acting hydraulic cylinder. Possibility of series connection to the existing system (requires connection of a pressure sleeve). Three-position lever (1-0-2), spring-loaded, ie it moves back into the vertical position. Neutral position 0 (lever up), piston rod of the hydraulic cylinder is stationary – oil overflows. Working position 1 (lever up), the piston rod of the hydraulic cylinder slides out. Working position 2 (lever up), the piston rod of the hydraulic cylinder retracts. Pump supply (P): female thread BSP 1/2. Return to tank (T). Female thread BSP 1/2. Output for sections (A, B). Female thread BSP 3/8. Pressure range Maximum supply pressure: 250 bar. Maximum return pressure: 50 bar. Maximum pressure in sections: 300bar. Bypass valve (safety) set at the factory to 175 bar. Self-adjusting, full turn 30 bar displacement. Permissible ambient temperature: 40 ° C to + 60 ° C. Permissible oil temperature: 15 ° C to + 80 ° C.

Comments Off

Tags: 11gpm, acting, bank, control, directional, hydraulic, single, valve

Categories: single

1x FLOATING spool 5 Bank Hydraulic Directional Control Valve 11gpm 40L 4x DA ex May 31, 2024

NOTE: We issue VAT invoices for countries in the European Union. 5 Spool Hydraulic Directional Control Valve 11gpm 40L. 1x FLOATING Double Acting. 4x Double Acting Cylinder DA. Hydraulic distributors are guaranteed for 2 years. It is used in hydraulic systems in agriculture, horticulture, forestry, construction and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, front loaders, construction machines, loaders, excavators, sweepers, industrial machines and for other applications hydraulically controlled. Recommended oil flow in the system: 0-40L / min. Control example: double-acting hydraulic cylinder. Possibility of series connection to the existing system (requires connection of a pressure sleeve). Three-position lever (1-0-2), spring-loaded, ie it moves back into the vertical position. Neutral position 0 (lever up), piston rod of the hydraulic cylinder is stationary – oil overflows. Working position 1 (lever up), the piston rod of the hydraulic cylinder slides out. Working position 2 (lever up), the piston rod of the hydraulic cylinder retracts. Pump supply (P): female thread BSP 1/2. Return to tank (T). Female thread BSP 1/2. Output for sections (A, B). Female thread BSP 3/8. Pressure range Maximum supply pressure: 250 bar. Maximum return pressure: 50 bar. Maximum pressure in sections: 300bar. Bypass valve (safety) set at the factory to 175 bar. Self-adjusting, full turn 30 bar displacement. Permissible ambient temperature: 40 ° C to + 60 ° C. Permissible oil temperature: 15 ° C to + 80 ° C. Dimensions can be changed slightly.

Comments Off

Tags: 11gpm, bank, control, directional, floating, hydraulic, spool, valve

Categories: floating

Hydraulic Directional Valve Anti Corrosive 1/2in 4 Spool Hydraulic Valve May 30, 2024

Hydraulic-Directional-Valve-Anti-Corrosive-1-2in-4-Spool-Hydraulic-Valve-01-sh

4 SPOOL: This 4 spool hydraulic control valve features 16.2MPa pressure, 1/2in diameter port, can be widely used for various hydraulic systems. HIGH STABILITY: With high stability and repeatability, this hydraulic valve can work stably for long periods of time in harsh working environments. ANTI CORROSIVE: With strong corrosion resistance, the hydraulic control valve can work stably for a long time in various corrosive environments. ACCURATE AND RELIABLE: The hydraulic valve has high accuracy, can be flexibly and accurately adjusted to ensure efficient and reliable operation. WIDE APPLICATION: This hydraulic valve is suitable for various occasion, such as factory, warehouse, forklift, sanitation vehicle, loader, tractor. Item Type: Hydraulic Control Valve Material: Cast iron Model: ZDA L15 4OT Function: A, O, Y, P, etc. Applicable Scenario: Can be widely used in hydraulic systems of construction machinery such as forklifts, sanitation vehicles, small loaders Application: Sanitation vehicles, obstacle removal vehicles, etc. Applicable Medium: Oil Applicable Temperature: -20? To +80? Nominal Pressure: 16.20MPa Nominal Diameter: Approx. 1 x Hydraulic Control Valve. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

Comments Off

Tags: 12in, anti, corrosive, directional, hydraulic, spool, valve

Categories: hydraulic

Rexroth R901186443 Hydraulic Directional Control Valve May 29, 2024

REXROTH R901186443 HYDRAULIC DIRECTIONAL CONTROL VALVE. MNR: R901186443 HYDRAULIC DIRECTIONAL CONTROL VALVE EN:53 FD: 55925 4 WE 6 JB62/EG24N9K4 S0945 124900852 PMAX= 350 BAR 7081 MADE IN GERMANY. Condition : New – Open Box. Track Page Views With.

Comments Off

Tags: control, directional, hydraulic, r901186443, rexroth, valve

Categories: rexroth

1x for Hydraulic Motors 4 Bank Hydraulic Directional Control Valve 11gpm 40L ex

NOTE: We issue VAT invoices for countries in the European Union. 4 SPOOL HYDRAULIC MONOBLOCK DIRECTIONAL VALVE 3x. Double Acting Cylinder 1x. Distributor with clip for hydraulic motor 04P40 A1A1A1D8 GKZ1. Hydraulic distributors are guaranteed for 2 years. It is used in hydraulic systems in agriculture, horticulture, forestry, construction and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, front loaders, construction machines, loaders, excavators, sweepers, industrial machines and for other applications hydraulically controlled. The distributor is ideal for controlling a hydraulic motor thanks to a lever with a snap mechanism. You can start the engine and exit the hydraulic distributor without constantly holding the lever. Control example: hydraulic motor in both directions and hydraulic cylinder in two-way operation. Recommended oil flow in the system: 0-40L / min. Hydraulic motor in both directions and hydraulic cylinders in two-way operation. Possibility of series connection to the existing system (requires connection of a pressure sleeve). Three-position lever (1 – 0 – 2), with snap lock, ie it holds the position in the working position. Position 0 neutral (lever in vertical position) Motor or actuator is at a standstill – oil overflows. Position 1 works (lever in diagonal forward position) Motor turns to the left or piston rod extends Position 2 works (lever in diagonal reverse position) The motor turns to the right or the piston rod of the actuator retracts. Pump supply (P): female thread BSP 1/2. Return to tank (T). Female thread BSP 1/2. Output for sections (A, B). Female thread BSP 3/8. Pressure range Maximum supply pressure: 250 bar. Maximum return pressure: 50 bar. Maximum pressure in sections: 300bar. Bypass valve (safety) set at the factory to 175 bar. Self-adjusting, full turn 30 bar displacement. Permissible ambient temperature: 40 ° C to + 60 ° C. Permissible oil temperature: 15 ° C to + 80 ° C. Dimensions can be changed slightly.

Comments Off

Tags: 11gpm, bank, control, directional, hydraulic, motors, valve

Categories: hydraulic

February 2025
M	T	W	T	F	S	S
« Jan
					1	2
3	4	5	6	7	8	9
10	11	12	13	14	15	16
17	18	19	20	21	22	23
24	25	26	27	28