Hydraulic Valve Direction

m June 29, 2025

7-Bank-Hydraulic-Monoblock-Directional-Spool-Lever-Valve-3-8-Bsp-40-L-m-01-fit

7 BANK/LEVER – 3/8 BSP HYDRAULIC DIRECTIONAL MONOBLOCK VALVE – 40 L/M. THIS IS WHAT WE SELL TO ORIGINAL EQUIPMENT VEHICLE BUILDERS. WE WILL ONLY RECOMEND THIS QUALITY VALVE NOT CHEAPER LIGHTER WEIGHT/DUTY VALVES. HIGH STRENGTH CAST IRON. HARD CHROME PLATED SPOOLS. TO SUIT 7 DOUBLE ACTING CYLINDERS. 3/8 BSP CONTROL PORTS. THE VALVE HAS 1/2 BSP PUMP (INPUT/PRESSURE) (P) PORT. TANK/RETURN (T) PORT IS 1/2 BSP. NOMINAL FLOW = 40 LITRES PER MINUTE. MAXIMUM OPERATING PRESSURE = 300 BAR. MAXIMUM PRESSURE’P’ PORT = 250 BAR. MAXIMUM PRSSURE’A&B’ PORTS = 250 BAR. MAXIMUM PRESSURE’T’ (RETURN) = 50 BAR. SPRING RETURN IN ALL POSITIONS – FORWARD, NEUTRAL & REVERSE. FLOW WILL UNLOAD FROM PRESSURE TO TANK IN CENTRE POSITION. Perfect Control for the following applications:- Refuse (Garbage) Trucks, Agricultural Machinery, Skip Trucks, Recovery Vehicles, Hydraulic Platforms, Hydraulic Presses, Concrete Pumps, Front-End Loaders. MAINLAND UK POST CODES – NOT HS/IV/PA/PH/AB/KA27-28 (OUT OF AREA) & BT. SURCHARGE WILL APPLY TO THESE AREA. INVOICE SUPPLIED WITH GOODS.

Comments Off

Tags: bank, directional, hydraulic, lever, monoblock, spool, valve

Categories: bank

2 x Single Acting 3 Bank Hydraulic Directional Control Valve 11gpm 40L 2x SA ex

NOTE: We issue VAT invoices for countries in the European Union. 3 Spool Hydraulic Directional Control Valve 11gpm 40L 2 x Single Acting Cylinder 1x Double Acting. Hydraulic distributors are guaranteed for 2 years. It is used in hydraulic systems in agriculture, horticulture, forestry, construction and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, front loaders, construction machines, loaders, excavators, sweepers, industrial machines and for other applications hydraulically controlled. Recommended oil flow in the system: 0-40L / min. Control example: double-acting hydraulic cylinder. Possibility of series connection to the existing system (requires connection of a pressure sleeve). Three-position lever (1-0-2), spring-loaded, ie it moves back into the vertical position. Neutral position 0 (lever up), piston rod of the hydraulic cylinder is stationary – oil overflows. Working position 1 (lever up), the piston rod of the hydraulic cylinder slides out. Working position 2 (lever up), the piston rod of the hydraulic cylinder retracts. Pump supply (P): female thread BSP 1/2. Return to tank (T). Female thread BSP 1/2. Output for sections (A, B). Female thread BSP 3/8. Pressure range Maximum supply pressure: 250 bar. Maximum return pressure: 50 bar. Maximum pressure in sections: 300bar. Bypass valve (safety) set at the factory to 175 bar. Self-adjusting, full turn 30 bar displacement. Permissible ambient temperature: 40 ° C to + 60 ° C. Permissible oil temperature: 15 ° C to + 80 ° C. Dimensions can be changed slightly.

Comments Off

Tags: 11gpm, acting, bank, control, directional, hydraulic, single, valve

Categories: single

Walvoil Q80, 1-10 Bank, 1/2, 80L, D/Acting Spring Directional Hydraulic Valve June 25, 2025

Walvoil-Q80-1-10-Bank-1-2-80L-D-Acting-Spring-Directional-Hydraulic-Valve-01-wc

Subscribe to our newsletter to get all the latest and exclusive offers. DOUBLE ACTING FIXED PIN HOLES. DOUBLE ACTING SPHERICAL ENDS. DOUBLE ACTING MICRO CYLINDER. DOUBLE ACTING LOG SPLITTER. TOP LINK FIXED MOUNT. TOP LINK AUTOMATIC HITCH. TOP LINK STANDARD MOUNT. PILOT OPERATED CHECK VALVES. FLOW CONTROL & DIVIDER VALVES. RELIEF & REGENERATIVE VALVES. BOLT ON VALVES FOR MOTORS. REDUCING & SEQUENCE VALVES. 2 PUMP HI-LO UNLOADING VALVES. DC PRESSURE & TANK CIRCUIT. AC PRESSURE & TANK CIRCUIT. DC MOTOR PUMPS SETS. GEAR PUMPS WITH CONNECTORS. GALTECH MULTIPLE GEAR PUMPS. TWO STAGE HI-LOW GEAR PUMPS. TWO STAGE HI-LOW GEAR PUMP KIT. PISTON & VANE PUMPS. TANK TOP RETURN FILTERS. LOW PRESSURE INLINE FILTER. HYDRAULIC QUICK RELEASE COUPLINGS. HYDRAULIC ISO A QRCS. HYDRAULIC FLAT FACE QRCS. HYDRAULIC CYLINDERS / RAMS. BUCHER UP100 AC POWER UNITS. FLOWFIT GM10 90L SPARES. SLICE VALVES – 3/4 BSP PORTS. SLICE VALVES – 3/8 BSP PORTS. FLOWFIT 3/4 160L/MIN VALVES. FLOWFIT 3/8 45L/MIN VALVES. MONOBLOCK VALVES-1/2 BSP PORTS. BUCHER HDM18 & HDM25 SPARES. SLICE VALVES – 1 BSP PORTS. FLOWFIT 1/2 45-90L/MIN VALVES. GALTECH 1/4 15-25L/MIN VALVES. GALTECH 3/8 40-50L/MIN VALVES. MONOBLOCK VALVES-1/4 BSP PORTS. MONOBLOCK VALVES-3/8 BSP PORTS. GALTECH 3/4 120L/MIN VALVES. MONOBLOCK VALVES-3/4 BSP PORTS. GALTECH 1/2 60L/MIN VALVES. BUCHER 3/4 100L/MIN VALVES. GALTECH 1/2 80-90L/MIN VALVES. GALTECH GMV15 & Q15 SPARES. BUCHER 1/2 45-70L/MIN VALVES. BUCHER 3/8 40-45L/MIN VALVES. BUCHER HDM140 & HDM11 SPARES. GALTECH Q80 SLICE VALVES. GALTECH Q75 & Q95 SPARES. SLICE VALVES – 1/2 BSP PORTS. GALTECH Q25 & Q45 SPARES. BELL HOUSING & DRIVE COUPLINGS. PETROL ENGINE ADAPTOR KITS. ELECTRIC MOTOR ADAPTOR KITS. PTO GEARBOX & PUMP ASSEMBLIES. ELECTRIC MOTORS & DRIVES. AC VARIABLE SPEED DRIVES. HYD QUICK RELEASE COUPLINGS. CETOP 7 SOLENOID VALVES. CETOP 3 SUBPLATES & MANIFOLDS. CETOP 10 SOLENOID VALVES. CETOP 3 MANUAL OPERATED VALVES. CETOP 8 MODULAR SANDWICH VALVE. MODULAR FLOW CONTROL VALVES. CETOP 5 SOLENOID VALVES. CETOP 8 SOLENOID VALVES. CETOP 5 MODULAR SANDWICH VALVE. CETOP 5 MANIFOLDS & SUBPLATES. CETOP 3 SOLENOID VALVES. CETOP 7 MODULAR SANDWICH VALVE. CETOP 3 MODULAR SANDWICH VALVE. HYDRAULIC HOSE & ADAPTORS. HYD ADAPTORS & BONDED SEALS. TEES & CROSS ADAPTORS. MALE x FIXED FEMALE. ADAPTOR AND BONDED SEAL KITS. PLUGS, CAPS & CRIMP NUTS. SWIVEL FEMALE x SWIVEL FEMALE. O’RING FACE SEAL. MALE x SWIVEL FEMALE ADAPTORS. SWEPTS, PUSH-INS & HOSE-TAILS. MALE x MALE ADAPTORS. HAND OPERATED HOSE CRIMPERS. ACCESSORIES FOR HOSE CRIMPERS. HOSE AND TUBE CLEANING. HYD TANKS WITH ACCESSORIES. HI-LOW GEAR PUMP KITS. BELL HOUSING & COUPLINGS. PETROL & DIESEL ENGINES. HONDA ENGINE ADAPTOR KITS. LONCIN ENGINE ADAPTOR KITS. Hydraulic 100mm Rear Gauges. Pneumatic 40mm Rear Gauges. Hydraulic 100mm Base Gauges. Pneumatic 50mm Base Gauges. Hydraulic 63mm Base Gauges. Pneumatic 40mm Base Gauges. Hydraulic 63mm Rear Gauges. Pneumatic 50mm Rear Gauges. PRESSURE GAUGE HOSE TEST KITS. Hydraulic 100mm Test Kits. Hydraulic 63mm Gauge Test Kits. GRANUELS & SPILL KITS. VEHICLE PTO & PUMP KITS. FAAM PTO AND PUMP KITS. LAND ROVER PTO AND PUMP KITS. PEUGEOT PTO AND PUMP KITS. OPEL PTO AND PUMP KITS. KIA PTO AND PUMP KITS. FORD PTO AND PUMP KITS. RENAULT PTO AND PUMP KITS. MAZDA PTO AND PUMP KITS. IVECO PTO AND PUMP KITS. VOLKSWAGEN PTO AND PUMP KITS. VAUXHALL PTO AND PUMP KITS. CITROEN PTO AND PUMP KITS. MERCEDES PTO AND PUMP KITS. MITSUBISHI PTO AND PUMP KITS. FIAT PTO AND PUMP KITS. ISUZU PTO AND PUMP KITS. HYUNDAI PTO AND PUMP KITS. TOYOTA PTO AND PUMP KITS. Bucher HDS11, 1-10 Bank, 3/8, 45L, D/Acting Spring, Directional Hydraulic Valve. Walvoil, 1-3 Bank, 3/4 BSP, 100 L/Min D/Acting, Spring Return, Solenoid Valve. Walvoil Q80, 1-10 Bank, 1/2, 80L, D/Acting Spring Directional Hydraulic Valve. Contamination level 16/14/12 – ISO 4406 – NAS1638 class 6- Ambient temperature: without electric devices (from -40°C to 60°C – from 40 °F to 140 °F) with electric devices (from -20°C to 50°C – from -4 °F to 122 °F) CHARACTERISTICS – High technical performances granting larger application range. Special high resistance cast-iron body, suitable for.. Contamination level 16/14/12 – ISO 4406 – NAS1638 class 6 – Ambient temperature: without electric devices (from -40°C to 60°C – from 40 °F to 140 °F) with electric devices (from -20°C to 50°C – from -4 °F to 122 °F). High technical performances granting larger application range. Special high resistance cast-iron body, suitable for high working pressures. Nickel-plated offering granting long working life under high pressure conditions (see attached scheme). Minimal internal leakages. Possibility to reverse the control side, turning the spool of 180 permits unification, versatility, and low valve of some parts in stock – Free movement version “Y shape” allows high oil flow with low-pressure drops, in relation with the small dimensions of the control valves. Better versatility compared to monoblock control valves and higher performances. Standard check valves on each element. Protection on single elements with auxiliary antishock, anti-cavitation and combined valves. Possibility of different types of circuit: PARALLEL, SERIES and SINGLE. Side and intermediate inlets and outlets. Possibility to connect intermediate elements with different type of valves in the same control valves. Bucher 1/2 BSP, 45 l/min Hose-Reel Monoblock Valve without Flow Control HDM11S. Hydraulic Slice Valve, 3 Bank 1/2 BSP 60 l/min Double Acting Spring Return HDS15. Q80 MSE 2/2 Solenoid Valve Unloader Cartridge c/w Manual Override 3/4UNFØ12.7mm. 19W Solenoid Coil to suit MSE Q80 Unloaders 12VDC & 24VDC. VIEW OUR CUSTOMERS FEEDBACK. I had to ask a dumb question, and they could not have been more helpful. Price good too, and the description including about whether or not these diverter valves are open centre or not. That is hugely important if you want to avoid a wrecked hydraulic pump! Not all sellers tell you that. La livraison a été rapide mais en ouvrant le carton, la cuve était éventrée.

Comments Off

Tags: 1-10, bank, dacting, directional, hydraulic, spring, valve, walvoil

Categories: walvoil

1x Single Acting 4 Bank Hydraulic Directional Control Valve 11gpm 40L 3x DA ex June 24, 2025

1x-Single-Acting-4-Bank-Hydraulic-Directional-Control-Valve-11gpm-40L-3x-DA-ex-01-lg

NOTE: We issue VAT invoices for countries in the European Union. 4 Spool Hydraulic Directional Control Valve 11gpm 40L 3x Double Acting Cylinder DA 1x Single Acting Cylinder. Hydraulic distributors are guaranteed for 2 years. It is used in hydraulic systems in agriculture, horticulture, forestry, construction and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, front loaders, construction machines, loaders, excavators, sweepers, industrial machines and for other applications hydraulically controlled. Recommended oil flow in the system: 0-40L / min. Control example: double-acting hydraulic cylinder. Possibility of series connection to the existing system (requires connection of a pressure sleeve). Three-position lever (1-0-2), spring-loaded, ie it moves back into the vertical position. Neutral position 0 (lever up), piston rod of the hydraulic cylinder is stationary – oil overflows. Working position 1 (lever up), the piston rod of the hydraulic cylinder slides out. Working position 2 (lever up), the piston rod of the hydraulic cylinder retracts. Pump supply (P): female thread BSP 1/2. Return to tank (T). Female thread BSP 1/2. Output for sections (A, B). Female thread BSP 3/8. Pressure range Maximum supply pressure: 250 bar. Maximum return pressure: 50 bar. Maximum pressure in sections: 300bar. Bypass valve (safety) set at the factory to 175 bar. Self-adjusting, full turn 30 bar displacement. Permissible ambient temperature: 40 ° C to + 60 ° C. Permissible oil temperature: 15 ° C to + 80 ° C. Dimensions can be changed slightly.

Comments Off

Tags: 11gpm, acting, bank, control, directional, hydraulic, single, valve

Categories: single

Bucher HDS30, 1-10 Bank, 3/4 120L, D/Acting Spring, Directional Hydraulic Valve June 19, 2025

Bucher-HDS30-1-10-Bank-3-4-120L-D-Acting-Spring-Directional-Hydraulic-Valve-01-ycvb

Subscribe to our newsletter to get all the latest and exclusive offers. DOUBLE ACTING FIXED PIN HOLES. DOUBLE ACTING SPHERICAL ENDS. DOUBLE ACTING MICRO CYLINDER. DOUBLE ACTING LOG SPLITTER. TOP LINK FIXED MOUNT. TOP LINK AUTOMATIC HITCH. TOP LINK STANDARD MOUNT. PILOT OPERATED CHECK VALVES. FLOW CONTROL & DIVIDER VALVES. RELIEF & REGENERATIVE VALVES. BOLT ON VALVES FOR MOTORS. REDUCING & SEQUENCE VALVES. 2 PUMP HI-LO UNLOADING VALVES. DC PRESSURE & TANK CIRCUIT. AC PRESSURE & TANK CIRCUIT. DC MOTOR PUMPS SETS. GEAR PUMPS WITH CONNECTORS. GALTECH MULTIPLE GEAR PUMPS. TWO STAGE HI-LOW GEAR PUMPS. TWO STAGE HI-LOW GEAR PUMP KIT. PISTON & VANE PUMPS. TANK TOP RETURN FILTERS. LOW PRESSURE INLINE FILTER. HYDRAULIC QUICK RELEASE COUPLINGS. HYDRAULIC ISO A QRCS. HYDRAULIC FLAT FACE QRCS. HYDRAULIC CYLINDERS / RAMS. BUCHER UP100 AC POWER UNITS. FLOWFIT GM10 90L SPARES. SLICE VALVES – 3/4 BSP PORTS. SLICE VALVES – 3/8 BSP PORTS. FLOWFIT 3/4 160L/MIN VALVES. FLOWFIT 3/8 45L/MIN VALVES. MONOBLOCK VALVES-1/2 BSP PORTS. BUCHER HDM18 & HDM25 SPARES. SLICE VALVES – 1 BSP PORTS. FLOWFIT 1/2 45-90L/MIN VALVES. GALTECH 1/4 15-25L/MIN VALVES. GALTECH 3/8 40-50L/MIN VALVES. MONOBLOCK VALVES-1/4 BSP PORTS. MONOBLOCK VALVES-3/8 BSP PORTS. GALTECH 3/4 120L/MIN VALVES. MONOBLOCK VALVES-3/4 BSP PORTS. GALTECH 1/2 60L/MIN VALVES. BUCHER 3/4 100L/MIN VALVES. GALTECH 1/2 80-90L/MIN VALVES. GALTECH GMV15 & Q15 SPARES. BUCHER 1/2 45-70L/MIN VALVES. BUCHER 3/8 40-45L/MIN VALVES. BUCHER HDM140 & HDM11 SPARES. GALTECH Q80 SLICE VALVES. GALTECH Q75 & Q95 SPARES. SLICE VALVES – 1/2 BSP PORTS. GALTECH Q25 & Q45 SPARES. BELL HOUSING & DRIVE COUPLINGS. PETROL ENGINE ADAPTOR KITS. ELECTRIC MOTOR ADAPTOR KITS. PTO GEARBOX & PUMP ASSEMBLIES. ELECTRIC MOTORS & DRIVES. AC VARIABLE SPEED DRIVES. HYD QUICK RELEASE COUPLINGS. CETOP 7 SOLENOID VALVES. CETOP 3 SUBPLATES & MANIFOLDS. CETOP 10 SOLENOID VALVES. CETOP 3 MANUAL OPERATED VALVES. CETOP 8 MODULAR SANDWICH VALVE. MODULAR FLOW CONTROL VALVES. CETOP 5 SOLENOID VALVES. CETOP 8 SOLENOID VALVES. CETOP 5 MODULAR SANDWICH VALVE. CETOP 5 MANIFOLDS & SUBPLATES. CETOP 3 SOLENOID VALVES. CETOP 7 MODULAR SANDWICH VALVE. CETOP 3 MODULAR SANDWICH VALVE. HYDRAULIC HOSE & ADAPTORS. HYD ADAPTORS & BONDED SEALS. TEES & CROSS ADAPTORS. MALE x FIXED FEMALE. ADAPTOR AND BONDED SEAL KITS. PLUGS, CAPS & CRIMP NUTS. SWIVEL FEMALE x SWIVEL FEMALE. O’RING FACE SEAL. MALE x SWIVEL FEMALE ADAPTORS. SWEPTS, PUSH-INS & HOSE-TAILS. MALE x MALE ADAPTORS. HAND OPERATED HOSE CRIMPERS. ACCESSORIES FOR HOSE CRIMPERS. HOSE AND TUBE CLEANING. HYD TANKS WITH ACCESSORIES. HI-LOW GEAR PUMP KITS. BELL HOUSING & COUPLINGS. PETROL & DIESEL ENGINES. HONDA ENGINE ADAPTOR KITS. LONCIN ENGINE ADAPTOR KITS. Hydraulic 100mm Rear Gauges. Pneumatic 40mm Rear Gauges. Hydraulic 100mm Base Gauges. Pneumatic 50mm Base Gauges. Hydraulic 63mm Base Gauges. Pneumatic 40mm Base Gauges. Hydraulic 63mm Rear Gauges. Pneumatic 50mm Rear Gauges. PRESSURE GAUGE HOSE TEST KITS. Hydraulic 100mm Test Kits. Hydraulic 63mm Gauge Test Kits. GRANUELS & SPILL KITS. VEHICLE PTO & PUMP KITS. FAAM PTO AND PUMP KITS. LAND ROVER PTO AND PUMP KITS. PEUGEOT PTO AND PUMP KITS. OPEL PTO AND PUMP KITS. KIA PTO AND PUMP KITS. FORD PTO AND PUMP KITS. RENAULT PTO AND PUMP KITS. MAZDA PTO AND PUMP KITS. IVECO PTO AND PUMP KITS. VOLKSWAGEN PTO AND PUMP KITS. VAUXHALL PTO AND PUMP KITS. CITROEN PTO AND PUMP KITS. MERCEDES PTO AND PUMP KITS. MITSUBISHI PTO AND PUMP KITS. FIAT PTO AND PUMP KITS. ISUZU PTO AND PUMP KITS. HYUNDAI PTO AND PUMP KITS. TOYOTA PTO AND PUMP KITS. Bucher Left Outlet Cover 3/4 BSP Ported With High Pressure Carry Over HDS20. Bucher 3/4 BSP Standard Right Hand Inlet Cover for HDS20. Bucher HDS30, 1-10 Bank, 3/4 120L, D/Acting Spring, Directional Hydraulic Valve. Bucher HDS30, 1-10 Bank, 3/4, 120L/Min, Double Acting Spring Return, Directional Hydraulic Valve. All valve options shown are for open centre applications only, Please ask our technical department for closed centre options. Max Flow Rate: 120 L/Min. Max continuous operating pressure supply port P: 250 Bar (3600 PSI). Max intermittent peak pressure work port A/B: 320 Bar (4600 PSI). Max back pressure tank port T: 30 Bar (430 PSI). Oil temperature: °C -10 to +80. Oil viscosity: mm2s 16 to 75. Number of spools: 1 to 10. Body: High strength cast-iron. Spool: Hardened steel – chrome plated. Internal load holding check valves (prevent reverse flow through valve when shifting). Balanced interchangeable spools (provides minimum leakage, smooth operation). Wide selection inlets, work ports, and outlets threaded ports. Negative overlapping of the spool. Optional features available please contact sales department. Hydraulic Slice Valve, 1 Bank 3/4 BSP 120 l/min Double Acting Spring Return HDS30. Hydraulic Slice Valve, 5 Bank 3/4 BSP 120 l/min Double Acting Spring Return HDS30. Hydraulic Slice Valve, 3 Bank 3/4 BSP 120 l/min Double Acting Spring Return HDS30. Hydraulic Slice Valve, 6 Bank 3/4 BSP 120 l/min Double Acting Spring Return HDS30. VIEW OUR CUSTOMERS FEEDBACK. I had to ask a dumb question, and they could not have been more helpful. Price good too, and the description including about whether or not these diverter valves are open centre or not. That is hugely important if you want to avoid a wrecked hydraulic pump! Not all sellers tell you that. La livraison a été rapide mais en ouvrant le carton, la cuve était éventrée.

Comments Off

Tags: 1-10, 120l, bank, bucher, dacting, directional, hds30, hydraulic, spring, valve

Categories: bucher

1x FLOATING 2 Bank Hydraulic Directional Control Valves 80L 21 gpm Double Acting June 16, 2025

1x-FLOATING-2-Bank-Hydraulic-Directional-Control-Valves-80L-21-gpm-Double-Acting-01-xcyc

NOTE: We issue VAT invoices for countries in the European Union. 2 BANK HYDRAULIC MONOBLOCK DIRECTIONAL SPOOL VALVE 2x Double Acting Cylinder +floating spool. Hydraulic distributors are guaranteed for 2 years. It is used in hydraulic systems in agriculture, horticulture, forestry, construction and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, front loaders, construction machines, loaders, excavators, sweepers, industrial machines and for other applications hydraulically controlled. Recommended oil flow in the system: 0-80L / min. Control example: double-acting hydraulic cylinder. Possibility of series connection to the existing system (requires connection of a pressure sleeve). Three-position lever (1-0-2), spring-loaded, ie it moves back into the vertical position. Neutral position 0 (lever up), piston rod of the hydraulic cylinder is stationary – oil overflows. Working position 1 (lever up), the piston rod of the hydraulic cylinder slides out. Working position 2 (lever up), the piston rod of the hydraulic cylinder retracts. Pump supply (P): female thread BSPP 3/4 ” (Sometimes BSPP 1/2″). Return to tank (T). Female thread BSPP 3/4. Output for sections (A, B). Female thread BSPP 1/2. Pressure range Maximum supply pressure: 250 bar. Maximum return pressure: 50 bar. Maximum pressure in sections: 300bar. Bypass valve (safety) set at the factory to 175 bar. Self-adjusting, full turn 30 bar displacement. Permissible ambient temperature: 40 ° C to + 60 ° C. Permissible oil temperature: 15 ° C to + 80 ° C.

Comments Off

Tags: acting, bank, control, directional, double, floating, hydraulic, valves

Categories: floating

1x Single 3 BANK Hydraulic Directional Control Valve JOYSTICK 11gpm 40L 2 xDA June 15, 2025

1x-Single-3-BANK-Hydraulic-Directional-Control-Valve-JOYSTICK-11gpm-40L-2-xDA-01-eplt

NOTE: We also issue VAT invoices on request. 3 Bank Hydraulic Directional Control Valves 1x JOYSTICK 1 x Single Acting 2 x Double Acting 40L 11gpm. HYDRAULIC DISTRIBUTOR 2 SECTION P40. CONTROL BY BUILT-IN JOYSTICK. Symbol: 02P40 A1A1C1+ JOY. It is widely used in hydraulic systems in agriculture, horticulture, forestry, construction, and well-known industries. The distributor is adapted to different types of machines, such as B. Agricultural machines, tractors, sprayers, round vehicles, cyclo-loaders, HDS loaders, construction machinery, loaders, excavators, sweepers, industrial machines and other hydraulically controlled devices. Recommended oil flow: 0 – 40 l / min. Example control: two 2-way drives. Possibility of serial connection to the existing system (pressure sleeve required). Joystick with five positions (1 – 2 – 0 – 3 – 4) on the spring, i. Position 0 neutral (joystick positioned vertically) piston rods of both drives are stationary – oil overflows. Working position 1 (joystick lever tilted forward) The piston rod of the first actuator extends. Working position 2 (joystick lever in an inclined position) The piston rod of the first drive is retracted. Working position 3 (joystick lever inclined to the left) The piston rod of the other drive extends. Working position 4 (joystick lever inclined to the right) The piston rod of the other drive is retracted. Pump supply (P1, P2): BSP 1/2 internal thread. Back to the tank (T1, T2): BSP 1/2 internal thread. Sections (A1, A2; B1, B2): BSP 3/8 internal thread. Serial connection (N): BSP 1/2 internal thread. Maximum pressure on the supply: 250bar. Maximum return pressure: 50 bar. Maximum pressure on the sections: 300 bar. The overflow valve is factory-set to 175 bar. Possibility of self-regulation, full turnover change by 30bar.

Comments Off

Tags: 11gpm, bank, control, directional, hydraulic, joystick, single, valve

Categories: single

5 BANK Hydraulic Directional Control Valve 2x JOYSTICK 11gpm 40L 5x Double ex June 14, 2025

NOTE: We also issue VAT invoices on request. 5 Bank Hydraulic Directional Control Valves 5 x Double Acting 40L 11gpm. HYDRAULIC DISTRIBUTOR 5 SECTION P40. CONTROL BY BUILT-IN JOYSTICKx2. Symbol: 05P40 5xA1+ 2x JOY. It is widely used in hydraulic systems in agriculture, horticulture, forestry, construction, and well-known industries. The distributor is adapted to different types of machines, such as B. Agricultural machines, tractors, sprayers, round vehicles, cyclo-loaders, HDS loaders, construction machinery, loaders, excavators, sweepers, industrial machines and other hydraulically controlled devices. Recommended oil flow: 0 – 40 l / min. Example control: two 2-way drives. Possibility of serial connection to the existing system (pressure sleeve required). Joystick with five positions (1 – 2 – 0 – 3 – 4) on the spring, i. Position 0 neutral (joystick positioned vertically) piston rods of both drives are stationary – oil overflows. Working position 1 (joystick lever tilted forward) The piston rod of the first actuator extends. Working position 2 (joystick lever in an inclined position) The piston rod of the first drive is retracted. Working position 3 (joystick lever inclined to the left) The piston rod of the other drive extends. Working position 4 (joystick lever inclined to the right) The piston rod of the other drive is retracted. Pump supply (P1, P2): BSP 1/2 internal thread. Back to the tank (T1, T2): BSP 1/2 internal thread. Sections (A1, A2; B1, B2): BSP 3/8 internal thread. Serial connection (N): BSP 1/2 internal thread. Maximum pressure on the supply: 250bar. Maximum return pressure: 50 bar. Maximum pressure on the sections: 300 bar. The overflow valve is factory-set to 175 bar. Possibility of self-regulation, full turnover change by 30bar.

Comments Off

Tags: 11gpm, bank, control, directional, double, hydraulic, joystick, valve

Categories: bank

3 BANK Hydraulic Directional Control Valve 21gpm 80L 1xSingle 2xDouble Acting ex June 11, 2025

3-BANK-Hydraulic-Directional-Control-Valve-21gpm-80L-1xSingle-2xDouble-Acting-ex-01-ps

NOTE: We issue VAT invoices for countries in the European Union. 3 BANK HYDRAULIC MONOBLOCK DIRECTIONAL SPOOL VALVE 2x Double Acting Cylinder 1x Single Acting. Hydraulic distributors are guaranteed for 2 years. It is used in hydraulic systems in agriculture, horticulture, forestry, construction and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, front loaders, construction machines, loaders, excavators, sweepers, industrial machines and for other applications hydraulically controlled. Recommended oil flow in the system: 0-80L / min. Control example: double-acting hydraulic cylinder. Possibility of series connection to the existing system (requires connection of a pressure sleeve). Three-position lever (1-0-2), spring-loaded, ie it moves back into the vertical position. Neutral position 0 (lever up), piston rod of the hydraulic cylinder is stationary – oil overflows. Working position 1 (lever up), the piston rod of the hydraulic cylinder slides out. Working position 2 (lever up), the piston rod of the hydraulic cylinder retracts. Pump supply (P): female thread BSPP 3/4 ” (Sometimes BSPP 1/2″). Return to tank (T). Female thread BSPP 3/4. Output for sections (A, B). Female thread BSPP 1/2. Pressure range Maximum supply pressure: 250 bar. Maximum return pressure: 50 bar. Maximum pressure in sections: 300bar. Bypass valve (safety) set at the factory to 175 bar. Self-adjusting, full turn 30 bar displacement. Permissible ambient temperature: 40 ° C to + 60 ° C. Permissible oil temperature: 15 ° C to + 80 ° C.

Comments Off

Tags: 1xsingle, 21gpm, 2xdouble, acting, bank, control, directional, hydraulic, valve

Categories: bank

1x for Hydraulic Motors 3 Bank Hydraulic Directional Control Valve 11gpm 40L DA June 10, 2025

1x-for-Hydraulic-Motors-3-Bank-Hydraulic-Directional-Control-Valve-11gpm-40L-DA-01-bv

NOTE: We issue VAT invoices for countries in the European Union. 3 SPOOL HYDRAULIC MONOBLOCK DIRECTIONAL VALVE 2x. Double Acting Cylinder 1x. Distributor with clip for hydraulic motor 03P40 A1A1D8 GKZ1. Hydraulic distributors are guaranteed for 2 years. It is used in hydraulic systems in agriculture, horticulture, forestry, construction and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, front loaders, construction machines, loaders, excavators, sweepers, industrial machines and for other applications hydraulically controlled. The distributor is ideal for controlling a hydraulic motor thanks to a lever with a snap mechanism. You can start the engine and exit the hydraulic distributor without constantly holding the lever. Control example: hydraulic motor in both directions and hydraulic cylinder in two-way operation. Recommended oil flow in the system: 0-40L / min. Hydraulic motor in both directions and hydraulic cylinders in two-way operation. Possibility of series connection to the existing system (requires connection of a pressure sleeve). Three-position lever (1 – 0 – 2), with snap lock, ie it holds the position in the working position. Position 0 neutral (lever in vertical position) Motor or actuator is at a standstill – oil overflows. Position 1 works (lever in diagonal forward position) Motor turns to the left or piston rod extends Position 2 works (lever in diagonal reverse position) The motor turns to the right or the piston rod of the actuator retracts. Pump supply (P): female thread BSP 1/2. Return to tank (T). Female thread BSP 1/2. Output for sections (A, B). Female thread BSP 3/8. Pressure range Maximum supply pressure: 250 bar. Maximum return pressure: 50 bar. Maximum pressure in sections: 300bar. Bypass valve (safety) set at the factory to 175 bar. Self-adjusting, full turn 30 bar displacement. Permissible ambient temperature: 40 ° C to + 60 ° C. Permissible oil temperature: 15 ° C to + 80 ° C. Dimensions can be changed slightly.

Comments Off

Tags: 11gpm, bank, control, directional, hydraulic, motors, valve

Categories: hydraulic

July 2025
M	T	W	T	F	S	S
« Jun
	1	2	3	4	5	6
7	8	9	10	11	12	13
14	15	16	17	18	19	20
21	22	23	24	25	26	27
28	29	30	31