Hydraulic Valve Direction

1x FLOATING 2 Bank Hydraulic Directional Control Valves 80L 21 gpm Double Acting June 24, 2024

1x-FLOATING-2-Bank-Hydraulic-Directional-Control-Valves-80L-21-gpm-Double-Acting-01-hnwb 1x FLOATING 2 Bank Hydraulic Directional Control Valves 80L 21 gpm Double Acting
1x FLOATING 2 Bank Hydraulic Directional Control Valves 80L 21 gpm Double Acting
1x FLOATING 2 Bank Hydraulic Directional Control Valves 80L 21 gpm Double Acting

1x FLOATING 2 Bank Hydraulic Directional Control Valves 80L 21 gpm Double Acting
NOTE: We issue VAT invoices for countries in the European Union. 2 BANK HYDRAULIC MONOBLOCK DIRECTIONAL SPOOL VALVE 2x Double Acting Cylinder +floating spool. Hydraulic distributors are guaranteed for 2 years. It is used in hydraulic systems in agriculture, horticulture, forestry, construction and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, front loaders, construction machines, loaders, excavators, sweepers, industrial machines and for other applications hydraulically controlled. Recommended oil flow in the system: 0-80L / min. Control example: double-acting hydraulic cylinder. Possibility of series connection to the existing system (requires connection of a pressure sleeve). Three-position lever (1-0-2), spring-loaded, ie it moves back into the vertical position. Neutral position 0 (lever up), piston rod of the hydraulic cylinder is stationary – oil overflows. Working position 1 (lever up), the piston rod of the hydraulic cylinder slides out. Working position 2 (lever up), the piston rod of the hydraulic cylinder retracts. Pump supply (P): female thread BSPP 3/4 ” (Sometimes BSPP 1/2″). Return to tank (T). Female thread BSPP 3/4. Output for sections (A, B). Female thread BSPP 1/2. Pressure range Maximum supply pressure: 250 bar. Maximum return pressure: 50 bar. Maximum pressure in sections: 300bar. Bypass valve (safety) set at the factory to 175 bar. Self-adjusting, full turn 30 bar displacement. Permissible ambient temperature: 40 ° C to + 60 ° C. Permissible oil temperature: 15 ° C to + 80 ° C.
1x FLOATING 2 Bank Hydraulic Directional Control Valves 80L 21 gpm Double Acting
Comments Off

1x for Hydraulic Motors 3 Bank Hydraulic Directional Control Valve 11gpm 40L DA

1x-for-Hydraulic-Motors-3-Bank-Hydraulic-Directional-Control-Valve-11gpm-40L-DA-01-mt 1x for Hydraulic Motors 3 Bank Hydraulic Directional Control Valve 11gpm 40L DA
1x for Hydraulic Motors 3 Bank Hydraulic Directional Control Valve 11gpm 40L DA
1x for Hydraulic Motors 3 Bank Hydraulic Directional Control Valve 11gpm 40L DA

1x for Hydraulic Motors 3 Bank Hydraulic Directional Control Valve 11gpm 40L DA
NOTE: We issue VAT invoices for countries in the European Union. 3 SPOOL HYDRAULIC MONOBLOCK DIRECTIONAL VALVE 2x. Double Acting Cylinder 1x. Distributor with clip for hydraulic motor 03P40 A1A1D8 GKZ1. Hydraulic distributors are guaranteed for 2 years. It is used in hydraulic systems in agriculture, horticulture, forestry, construction and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, front loaders, construction machines, loaders, excavators, sweepers, industrial machines and for other applications hydraulically controlled. The distributor is ideal for controlling a hydraulic motor thanks to a lever with a snap mechanism. You can start the engine and exit the hydraulic distributor without constantly holding the lever. Control example: hydraulic motor in both directions and hydraulic cylinder in two-way operation. Recommended oil flow in the system: 0-40L / min. Hydraulic motor in both directions and hydraulic cylinders in two-way operation. Possibility of series connection to the existing system (requires connection of a pressure sleeve). Three-position lever (1 – 0 – 2), with snap lock, ie it holds the position in the working position. Position 0 neutral (lever in vertical position) Motor or actuator is at a standstill – oil overflows. Position 1 works (lever in diagonal forward position) Motor turns to the left or piston rod extends Position 2 works (lever in diagonal reverse position) The motor turns to the right or the piston rod of the actuator retracts. Pump supply (P): female thread BSP 1/2. Return to tank (T). Female thread BSP 1/2. Output for sections (A, B). Female thread BSP 3/8. Pressure range Maximum supply pressure: 250 bar. Maximum return pressure: 50 bar. Maximum pressure in sections: 300bar. Bypass valve (safety) set at the factory to 175 bar. Self-adjusting, full turn 30 bar displacement. Permissible ambient temperature: 40 ° C to + 60 ° C. Permissible oil temperature: 15 ° C to + 80 ° C. Dimensions can be changed slightly.
1x for Hydraulic Motors 3 Bank Hydraulic Directional Control Valve 11gpm 40L DA
Comments Off