Hydraulic Valve Direction

1x FLOATING 2 Bank Hydraulic Directional Control Valves 80L 21 gpm DA ex June 15, 2024

1x-FLOATING-2-Bank-Hydraulic-Directional-Control-Valves-80L-21-gpm-DA-ex-01-rc

NOTE: We issue VAT invoices for countries in the European Union. 2 BANK HYDRAULIC MONOBLOCK DIRECTIONAL SPOOL VALVE 2x Double Acting Cylinder +floating spool. Hydraulic distributors are guaranteed for 2 years. It is used in hydraulic systems in agriculture, horticulture, forestry, construction and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, front loaders, construction machines, loaders, excavators, sweepers, industrial machines and for other applications hydraulically controlled. Recommended oil flow in the system: 0-80L / min. Control example: double-acting hydraulic cylinder. Possibility of series connection to the existing system (requires connection of a pressure sleeve). Three-position lever (1-0-2), spring-loaded, ie it moves back into the vertical position. Neutral position 0 (lever up), piston rod of the hydraulic cylinder is stationary – oil overflows. Working position 1 (lever up), the piston rod of the hydraulic cylinder slides out. Working position 2 (lever up), the piston rod of the hydraulic cylinder retracts. Pump supply (P): female thread BSPP 3/4 ” (Sometimes BSPP 1/2″). Return to tank (T). Female thread BSPP 3/4. Output for sections (A, B). Female thread BSPP 1/2. Pressure range Maximum supply pressure: 250 bar. Maximum return pressure: 50 bar. Maximum pressure in sections: 300bar. Bypass valve (safety) set at the factory to 175 bar. Self-adjusting, full turn 30 bar displacement. Permissible ambient temperature: 40 ° C to + 60 ° C. Permissible oil temperature: 15 ° C to + 80 ° C.

Comments Off

Tags: bank, control, directional, floating, hydraulic, valves

Categories: floating

Pilot Pressure Control Manual Joysticks To Electronics

Comments Off

Tags: control, electronics, joysticks, manual, pilot, pressure

Categories: pilot

PARKER D1VW020DNK / Con-Tech 760158 HYDRAULIC DIRECTIONAL CONTROL VALVE June 14, 2024

PARKER D1VW020DNKJTJ94XB1194 / Con-Tech 760158 HYDRAULIC DIRECTIONAL CONTROL VALVE. Factory packaging is a bit shop worn.

Comments Off

Tags: con-tech, control, d1vw020dnk, directional, hydraulic, parker, valve

Categories: parker

Hydraulic Control Valve Cast Iron 4 Spool 1/2 Inch Hydraulic Directional Valve

4 SPOOL: This 4 spool hydraulic control valve features 16.2MPa pressure, 1/2in diameter port, can be widely used for various hydraulic systems. HIGH STABILITY: With high stability and repeatability, this hydraulic valve can work stably for long periods of time in harsh working environments. ANTI CORROSIVE: With strong corrosion resistance, the hydraulic control valve can work stably for a long time in various corrosive environments. ACCURATE AND RELIABLE: The hydraulic valve has high accuracy, can be flexibly and accurately adjusted to ensure efficient and reliable operation. WIDE APPLICATION: This hydraulic valve is suitable for various occasion, such as factory, warehouse, forklift, sanitation vehicle, loader, tractor. Item Type: Hydraulic Control Valve Material: Cast iron Model: ZDA L15 4OT Function: A, O, Y, P, etc. Applicable Scenario: Can be widely used in hydraulic systems of construction machinery such as forklifts, sanitation vehicles, small loaders Application: Sanitation vehicles, obstacle removal vehicles, etc. Applicable Medium: Oil Applicable Temperature: -20? To +80? Nominal Pressure: 16.20MPa Nominal Diameter: Approx. 1 x Hydraulic Control Valve. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

Comments Off

Tags: cast, control, directional, hydraulic, inch, iron, spool, valve

Categories: hydraulic

Hydraulic Manual Spool Diverter Valve 3 Way, 3/8 BSP Ports 2 Position Spring June 13, 2024

Hydraulic-Manual-Spool-Diverter-Valve-3-Way-3-8-BSP-Ports-2-Position-Spring-01-nvrs

Subscribe to our newsletter to get all the latest and exclusive offers. BELL HOUSING & DRIVE COUPLINGS. PETROL ENGINE ADAPTOR KITS. ELECTRIC MOTOR ADAPTOR KITS. PTO GEARBOX & PUMP ASSEMBLIES. FLOWFIT GM10 90L SPARES. SLICE VALVES – 3/4 BSP PORTS. SLICE VALVES – 3/8 BSP PORTS. FLOWFIT 3/4 160L/MIN VALVES. FLOWFIT 3/8 45L/MIN VALVES. MONOBLOCK VALVES-1/2 BSP PORTS. BUCHER HDM18 & HDM25 SPARES. SLICE VALVES – 1 BSP PORTS. FLOWFIT 1/2 45-90L/MIN VALVES. GALTECH 1/4 15-25L/MIN VALVES. GALTECH 3/8 40-50L/MIN VALVES. MONOBLOCK VALVES-1/4 BSP PORTS. MONOBLOCK VALVES-3/8 BSP PORTS. GALTECH 3/4 120L/MIN VALVES. MONOBLOCK VALVES-3/4 BSP PORTS. GALTECH 1/2 60L/MIN VALVES. BUCHER 3/4 100L/MIN VALVES. GALTECH 1/2 80-90L/MIN VALVES. GALTECH GMV15 & Q15 SPARES. BUCHER 1/2 45-70L/MIN VALVES. BUCHER 3/8 40-45L/MIN VALVES. BUCHER HDM140 & HDM11 SPARES. GALTECH Q80 SLICE VALVES. GALTECH Q75 & Q95 SPARES. SLICE VALVES – 1/2 BSP PORTS. GALTECH Q25 & Q45 SPARES. ELECTRIC MOTORS & DRIVES. AC VARIABLE SPEED DRIVES. HYD QUICK RELEASE COUPLINGS. HYDRAULIC ISO A QRCS. HYDRAULIC FLAT FACE QRCS. PILOT OPERATED CHECK VALVES. RELIEF & SEQUENCE VALVES. 2 PUMP HI-LO UNLOADING VALVES. FLOW CONTROL & DIVIDER VALVES. CETOP 7 SOLENOID VALVES. CETOP 3 SUBPLATES & MANIFOLDS. CETOP 10 SOLENOID VALVES. CETOP 3 MANUAL OPERATED VALVES. CETOP 8 MODULAR SANDWICH VALVE. MODULAR FLOW CONTROL VALVES. CETOP 5 SOLENOID VALVES. CETOP 8 SOLENOID VALVES. CETOP 5 MODULAR SANDWICH VALVE. CETOP 5 MANIFOLDS & SUBPLATES. CETOP 3 SOLENOID VALVES. CETOP 7 MODULAR SANDWICH VALVE. CETOP 3 MODULAR SANDWICH VALVE. HYDRAULIC CYLINDERS / RAMS. TOP LINK STANDARD MOUNT. TOP LINK FIXED MOUNT. TOP LINK AUTOMATIC HITCH. DOUBLE ACTING SPHERICAL ENDS. DOUBLE ACTING LOG SPLITTER. DOUBLE ACTING MICRO CYLINDER. DOUBLE ACTING FIXED PIN HOLES. TANK TOP RETURN FILTERS. LOW PRESSURE INLINE FILTER. HYDRAULIC HOSE & ADAPTORS. HYD ADAPTORS & BONDED SEALS. TEES & CROSS ADAPTORS. MALE x FIXED FEMALE. ADAPTOR AND BONDED SEAL KITS. PLUGS, CAPS & CRIMP NUTS. SWIVEL FEMALE x SWIVEL FEMALE. O’RING FACE SEAL. MALE x SWIVEL FEMALE ADAPTORS. SWEPTS, PUSH-INS & HOSE-TAILS. MALE x MALE ADAPTORS. HAND OPERATED HOSE CRIMPERS. ACCESSORIES FOR HOSE CRIMPERS. HOSE AND TUBE CLEANING. AC PRESSURE & TANK CIRCUIT. BUCHER UP100 AC POWER UNITS. DC MOTOR PUMPS SETS. DC PRESSURE & TANK CIRCUIT. PISTON & VANE PUMPS. GALTECH MULTIPLE GEAR PUMPS. TWO STAGE HI-LOW GEAR PUMPS. TWO STAGE HI-LOW GEAR PUMP KIT. HYD TANKS WITH ACCESSORIES. HI-LOW GEAR PUMP KITS. BELL HOUSING & COUPLINGS. PETROL & DIESEL ENGINES. HONDA ENGINE ADAPTOR KITS. LONCIN ENGINE ADAPTOR KITS. Hydraulic 100mm Rear Gauges. Pneumatic 40mm Rear Gauges. Hydraulic 100mm Base Gauges. Pneumatic 50mm Base Gauges. Hydraulic 63mm Base Gauges. Pneumatic 40mm Base Gauges. Hydraulic 63mm Rear Gauges. Pneumatic 50mm Rear Gauges. PRESSURE GAUGE HOSE TEST KITS. Hydraulic 100mm Test Kits. Hydraulic 63mm Gauge Test Kits. VEHICLE PTO & PUMP KITS. FAAM PTO AND PUMP KITS. LAND ROVER PTO AND PUMP KITS. PEUGEOT PTO AND PUMP KITS. OPEL PTO AND PUMP KITS. KIA PTO AND PUMP KITS. FORD PTO AND PUMP KITS. RENAULT PTO AND PUMP KITS. MAZDA PTO AND PUMP KITS. IVECO PTO AND PUMP KITS. VOLKSWAGEN PTO AND PUMP KITS. VAUXHALL PTO AND PUMP KITS. CITROEN PTO AND PUMP KITS. MERCEDES PTO AND PUMP KITS. MITSUBISHI PTO AND PUMP KITS. FIAT PTO AND PUMP KITS. ISUZU PTO AND PUMP KITS. HYUNDAI PTO AND PUMP KITS. TOYOTA PTO AND PUMP KITS. Cofluid Portable Crimper 700 Bar Battery Pump Kit, Up to 200 Crimps. Otto Weldless Steel Tank, 1/2 Drain C/W Gasket & Plain Lid, Complete Set. Hydraulic Manual Spool Diverter Valve 3 Way, 3/8 BSP Ports 2 Position Spring. Hydraulic Manual Spool Diverter Valve 3 Port 3/8 BSP Ports 2 Position Spring. Walvoil DF5/3A17L 3 Way Manual Spool Hydraulic Diverter Open Centre Spring Return. Max Flow: 60 L/min. 17L Code indicates standard lever operated, Spring Return in position 1. Position 1 is lever towards valve body. No listed products found. VIEW OUR CUSTOMERS FEEDBACK. I had to ask a dumb question, and they could not have been more helpful. Price good too, and the description including about whether or not these diverter valves are open centre or not. That is hugely important if you want to avoid a wrecked hydraulic pump! Not all sellers tell you that. La livraison a été rapide mais en ouvrant le carton, la cuve était éventrée.

Comments Off

Tags: diverter, hydraulic, manual, ports, position, spool, spring, valve

Categories: hydraulic

6 BANK Hydraulic Directional Control Valve 2x JOYSTICK 21gpm 80L 6x Double ex

NOTE: We issue VAT invoices for countries in the European Union. HYDRAULIC DISTRIBUTOR 6 SECTION P80 6x Double Acting. CONTROL BY BUILT-IN 2x JOYSTICK. Symbol: 06P80 6xA1 + 2xJOY. It is widely used in hydraulic systems in agriculture, horticulture, forestry, construction, and well-known industries. The distributor is adapted to different types of machines, such as B. Agricultural machines, tractors, sprayers, round vehicles, cyclo-loaders, HDS loaders, construction machinery, loaders, excavators, sweepers, industrial machines and other hydraulically controlled devices. Recommended oil flow: 0 – 80 l / min. Example control: two 2-way drives. Possibility of serial connection to the existing system (pressure sleeve required). Joystick with five positions (1 – 2 – 0 – 3 – 4) on the spring, i. Position 0 neutral (joystick positioned vertically) piston rods of both drives are stationary – oil overflows. Working position 1 (joystick lever tilted forward) The piston rod of the first actuator extends. Working position 2 (joystick lever in an inclined position) The piston rod of the first drive is retracted. Working position 3 (joystick lever inclined to the left) The piston rod of the other drive extends. Working position 4 (joystick lever inclined to the right) The piston rod of the other drive is retracted. Return to the tank (T): BSPP 3/4 female thread. Outlet for section (A, B): BSPP 1/2 female thread. Series connection (N): BSPP 3/4 female thread. Maximum pressure on the supply: 250bar. Maximum return pressure: 50 bar. Maximum pressure on the sections: 300 bar. The overflow valve is factory-set to 175 bar. Possibility of self-regulation, full turnover change by 30bar. Dimensions can be changed slightly.

Comments Off

Tags: 21gpm, bank, control, directional, double, hydraulic, joystick, valve

Categories: bank

Hydraulic High Pressure Ball Valve 2 WAY- BSPP Various Sizes June 12, 2024

Hydraulic High Pressure Ball Valve – 2 WAY – BSPP – Various Sizes. 2 Way high pressure ball valves are commonly used as shut off valves or flow control valves in industrial applications. &#######xA0;&#######xA0;&#######xA0;&#######xA0;&#######xA0;&#######xA0. Ports = 2 x BSPP Female. Body = Zinc Plated Steel. Ball = Hard Chrome Plated Steel. Valve Seats = Machined Delrin. &#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B. You can return a product for up to 14 days from the date the product is delivered. Any product you return must be in the same condition you received it and in the original packaging. Is an online B2C platform of industrial and hydraulic connection components. Our distribution warehouse and workshop are situated in Melbourne fully staffed with technician&#######xA0;working years in the hydraulic industry. We have established long-term partnership with reputable vendors worldwide which enable us to offer top quality and reliable products at great prices. Our product range&#######xA0;includes the following:&#######xA0. &#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;Hydraulic rubber hoses (Budget and Premium series)&#######xA0. Indstrial hoses Power steering hose, suction hose, water S/D hoses etc. Hydraulic fittings (crimped fittings & field attachable fittings – matched solution with our hoses)&#######xA0. Excellent customer service and fast turnover are absolute focuses of our business. We will endeavour to go above and beyond to cater for your specific requirements. Improper selection and installation of the above listed products may result in property damage, bodily injury or death. Consider all aspects of our application carefully to ensure that the products selected are the most appropriate for the task. If in doubt, consult with personnel who have received proper t. Echnical and mechanical training. See our other items. 2 Way high pressure ball valves are commonly used as shut off valves or flow control valves in industrial applications · Ports = 2 x BSPP Female. Materials of Construction Body = Zinc Plated Steel Ball = Hard Chrome Plated Steel Valve Seats = Machined Delrin Seals = NBR Handle = Aluminium.

Comments Off

Tags: ball, bspp, high, hydraulic, pressure, sizes, valve, various, way-

Categories: hydraulic

Parker Hydraulic solenoid directional valve D1V001CYNCF

This Parker hydraulic solenoid directional valve is an essential component for your hydraulic system. Designed for precision and reliable performance, this valve is suitable for use in a wide range of industrial applications. With its solenoid valve operation, it ensures smooth and accurate control of your hydraulic system. Crafted from high-quality materials and built to last, this directional valve is a must-have for businesses and industries that rely on hydraulic systems. Its compact and lightweight design makes it easy to install and operate, while its durable construction ensures a long service life. Whether you’re looking to upgrade your existing hydraulic system or building a new one from scratch, this Parker solenoid valve is the perfect choice. We used the coils off of this instead of switching the whole valve.

Comments Off

Tags: d1v001cyncf, directional, hydraulic, parker, solenoid, valve

Categories: parker

Argo Hytos RPE3-62R16 HYDRAULIC DIRECTIONAL VALVE USED AND WORKING June 11, 2024

Argo-Hytos-RPE3-62R16-HYDRAULIC-DIRECTIONAL-VALVE-USED-AND-WORKING-01-ssm

An vat invoice will be provided with the package. This item is sourced from a reputable commercial supplier and is listed exactly as described in the “Item Condition” section, unless otherwise stated. If the item is listed as new, it will be brand new. If listed as Spares & Repairs, please note that it may not be a fully functional unit and may be missing certain parts. The item condition will be clearly stated as one of the following: NEW, NEW (other), Refurbished, Used, or Spares & Repairs. If the item is marked as Used or Refurbished, please expect a reasonable and fair amount of markings that are typical for pre-owned items. Please refer to the provided pictures of the item to assess its condition and cosmetic appearance. We make every effort to capture any issues, marks, blemishes, or notable features worth showcasing. At times, we may use a set of generic images that represent the item’s typical used appearance, which will be applicable to multiple units we sell. However, rest assured that your item will be in the same or better condition than depicted in the majority of units we have available. Thank you for considering our product. If you have any further questions or need assistance, please don’t hesitate to reach out. We value your satisfaction and look forward to serving you.

Comments Off

Tags: argo, directional, hydraulic, hytos, rpe3-62r16, used, valve, working

Categories: argo