NOTE: We issue VAT invoices for countries in the European Union. 2 SECTION HYDRAULIC DISTRIBUTOR P40. It is widely used in hydraulic systems in agriculture, horticulture, forestry, construction and industry in a broad sense. The distributor is adapted to various types of machines such as: agricultural machines, tractors, sprayers, rounds, cyclops, HDS loaders, construction machines, loaders, excavators, sweepers, industrial machines and other hydraulically controlled devices. Recommended system oil flow: 0 – 40 l / min. Sample control: 2-sided actuator. Can be connected in series to an existing system (pressure sleeve required). Three-position lever (1 – 0 – 2), spring loaded, i. Position 0 neutral (lever set vertically) cylinder piston rod stands – oil goes to the overflow. Position 1 working (lever set in a forward position) the cylinder piston extends. The 2 working position (lever positioned backwards) the piston rod of the cylinder retracts. Distributor hydraulic diagram on the right. Pump feed (P): BSP 1/2”internal thread Return to tank (T): BSP 1/2”internal thread Section output (A, B): BSP 3/8”internal thread Series connection (N): BSP 1/2internal thread. Maximum supply pressure: 250Bar Maximum return pressure: 50Bar Maximum pressure on sections: 300Bar. Factory overflow valve set at 175Bar Self-adjusting, full turn, change by 30Bar. Wide lever configuration options (examples in the picture). Recommended oil temperature range. Permissible ambient temperature: -40 C to +60 C Permissible oil temperature: -15 C to +80 C.
Categories spool