Hydraulic Valve Direction

Acting Spring, Directional Hydraulic Valve June 9, 2025

Bucher-HDS11-1-10-Bank-3-8-45L-D-Acting-Spring-Directional-Hydraulic-Valve-01-nd

Subscribe to our newsletter to get all the latest and exclusive offers. DOUBLE ACTING FIXED PIN HOLES. DOUBLE ACTING SPHERICAL ENDS. DOUBLE ACTING MICRO CYLINDER. DOUBLE ACTING LOG SPLITTER. TOP LINK FIXED MOUNT. TOP LINK AUTOMATIC HITCH. TOP LINK STANDARD MOUNT. PILOT OPERATED CHECK VALVES. FLOW CONTROL & DIVIDER VALVES. RELIEF & REGENERATIVE VALVES. BOLT ON VALVES FOR MOTORS. REDUCING & SEQUENCE VALVES. 2 PUMP HI-LO UNLOADING VALVES. DC PRESSURE & TANK CIRCUIT. AC PRESSURE & TANK CIRCUIT. DC MOTOR PUMPS SETS. GEAR PUMPS WITH CONNECTORS. GALTECH MULTIPLE GEAR PUMPS. TWO STAGE HI-LOW GEAR PUMPS. TWO STAGE HI-LOW GEAR PUMP KIT. PISTON & VANE PUMPS. TANK TOP RETURN FILTERS. LOW PRESSURE INLINE FILTER. HYDRAULIC QUICK RELEASE COUPLINGS. HYDRAULIC ISO A QRCS. HYDRAULIC FLAT FACE QRCS. HYDRAULIC CYLINDERS / RAMS. BUCHER UP100 AC POWER UNITS. FLOWFIT GM10 90L SPARES. SLICE VALVES – 3/4 BSP PORTS. SLICE VALVES – 3/8 BSP PORTS. FLOWFIT 3/4 160L/MIN VALVES. FLOWFIT 3/8 45L/MIN VALVES. MONOBLOCK VALVES-1/2 BSP PORTS. BUCHER HDM18 & HDM25 SPARES. SLICE VALVES – 1 BSP PORTS. FLOWFIT 1/2 45-90L/MIN VALVES. GALTECH 1/4 15-25L/MIN VALVES. GALTECH 3/8 40-50L/MIN VALVES. MONOBLOCK VALVES-1/4 BSP PORTS. MONOBLOCK VALVES-3/8 BSP PORTS. GALTECH 3/4 120L/MIN VALVES. MONOBLOCK VALVES-3/4 BSP PORTS. GALTECH 1/2 60L/MIN VALVES. BUCHER 3/4 100L/MIN VALVES. GALTECH 1/2 80-90L/MIN VALVES. GALTECH GMV15 & Q15 SPARES. BUCHER 1/2 45-70L/MIN VALVES. BUCHER 3/8 40-45L/MIN VALVES. BUCHER HDM140 & HDM11 SPARES. GALTECH Q80 SLICE VALVES. GALTECH Q75 & Q95 SPARES. SLICE VALVES – 1/2 BSP PORTS. GALTECH Q25 & Q45 SPARES. BELL HOUSING & DRIVE COUPLINGS. PETROL ENGINE ADAPTOR KITS. ELECTRIC MOTOR ADAPTOR KITS. PTO GEARBOX & PUMP ASSEMBLIES. ELECTRIC MOTORS & DRIVES. AC VARIABLE SPEED DRIVES. HYD QUICK RELEASE COUPLINGS. CETOP 7 SOLENOID VALVES. CETOP 3 SUBPLATES & MANIFOLDS. CETOP 10 SOLENOID VALVES. CETOP 3 MANUAL OPERATED VALVES. CETOP 8 MODULAR SANDWICH VALVE. MODULAR FLOW CONTROL VALVES. CETOP 5 SOLENOID VALVES. CETOP 8 SOLENOID VALVES. CETOP 5 MODULAR SANDWICH VALVE. CETOP 5 MANIFOLDS & SUBPLATES. CETOP 3 SOLENOID VALVES. CETOP 7 MODULAR SANDWICH VALVE. CETOP 3 MODULAR SANDWICH VALVE. HYDRAULIC HOSE & ADAPTORS. HYD ADAPTORS & BONDED SEALS. TEES & CROSS ADAPTORS. MALE x FIXED FEMALE. ADAPTOR AND BONDED SEAL KITS. PLUGS, CAPS & CRIMP NUTS. SWIVEL FEMALE x SWIVEL FEMALE. O’RING FACE SEAL. MALE x SWIVEL FEMALE ADAPTORS. SWEPTS, PUSH-INS & HOSE-TAILS. MALE x MALE ADAPTORS. HAND OPERATED HOSE CRIMPERS. ACCESSORIES FOR HOSE CRIMPERS. HOSE AND TUBE CLEANING. HYD TANKS WITH ACCESSORIES. HI-LOW GEAR PUMP KITS. BELL HOUSING & COUPLINGS. PETROL & DIESEL ENGINES. HONDA ENGINE ADAPTOR KITS. LONCIN ENGINE ADAPTOR KITS. Hydraulic 100mm Rear Gauges. Pneumatic 40mm Rear Gauges. Hydraulic 100mm Base Gauges. Pneumatic 50mm Base Gauges. Hydraulic 63mm Base Gauges. Pneumatic 40mm Base Gauges. Hydraulic 63mm Rear Gauges. Pneumatic 50mm Rear Gauges. PRESSURE GAUGE HOSE TEST KITS. Hydraulic 100mm Test Kits. Hydraulic 63mm Gauge Test Kits. GRANUELS & SPILL KITS. VEHICLE PTO & PUMP KITS. FAAM PTO AND PUMP KITS. LAND ROVER PTO AND PUMP KITS. PEUGEOT PTO AND PUMP KITS. OPEL PTO AND PUMP KITS. KIA PTO AND PUMP KITS. FORD PTO AND PUMP KITS. RENAULT PTO AND PUMP KITS. MAZDA PTO AND PUMP KITS. IVECO PTO AND PUMP KITS. VOLKSWAGEN PTO AND PUMP KITS. VAUXHALL PTO AND PUMP KITS. CITROEN PTO AND PUMP KITS. MERCEDES PTO AND PUMP KITS. MITSUBISHI PTO AND PUMP KITS. FIAT PTO AND PUMP KITS. ISUZU PTO AND PUMP KITS. HYUNDAI PTO AND PUMP KITS. TOYOTA PTO AND PUMP KITS. Walvoil, 1-3 Bank, 3/4 BSP, 100 L/Min D/Acting, Spring Return, Solenoid Valve. Walvoil Q95, 1-6 Bank, 3/4 BSP 120 l/min Double Acting, 3 Position Spring Return. Bucher HDS11, 1-10 Bank, 3/8, 45L, D/Acting Spring, Directional Hydraulic Valve. Bucher HDS11, 1-10 Bank, 3/8, 45L/Min, Double Acting Spring Return, Directional Hydraulic Valve. All valve options shown are for open centre applications only, Please ask our technical department for closed centre options. Max Flow Rate: 45 L/Min. Max continuous operating pressure supply port P: 250 Bar (3600 PSI). Max intermittent peak pressure work port A/B: 320 Bar (4600 PSI). Max back pressure tank port T: 30 Bar (430 PSI). Oil temperature: °C -10 to +80. Oil viscosity: mm2s 16 to 75. Number of spools: 1 to 10. Body: High strength cast-iron. Spool: Hardened steel – chrome plated. Balanced interchangeable spools (provides minimum leakage, smooth operation). Wide selections inlets, work ports, and outlets threaded ports. Negative overlapping of the spool. Optional features available please contact sales department. Hydraulic Hose-Reel Slice Valve 3/8 BSP, 45 l/min without Flow Control HDS11/1(15). Bucher CAP Leva L1750375 HDS11 Lever Pivot Box. Bucher Standard HDS11 slice with A spool 3 position Spring Return with Lever. Hydraulic Slice Valve, 3 Bank 3/8 BSP 45 l/min Double Acting Spring Return HDS11. VIEW OUR CUSTOMERS FEEDBACK. I had to ask a dumb question, and they could not have been more helpful. Price good too, and the description including about whether or not these diverter valves are open centre or not. That is hugely important if you want to avoid a wrecked hydraulic pump! Not all sellers tell you that. La livraison a été rapide mais en ouvrant le carton, la cuve était éventrée.

Comments Off

Tags: 1-10, bank, bucher, dacting, directional, hds11, hydraulic, spring, valve

Categories: bucher

4 BANK Hydraulic Directional Control Valve 2x JOYSTICK 21gpm 80L 4x DA Double June 6, 2025

NOTE: We issue VAT invoices for countries in the European Union. HYDRAULIC DISTRIBUTOR 4 SECTION P80 4x Double Acting. CONTROL BY BUILT-IN 2x JOYSTICK. Symbol: 04P80 A1A1A1A1 + 2xJOY. It is widely used in hydraulic systems in agriculture, horticulture, forestry, construction, and well-known industries. The distributor is adapted to different types of machines, such as B. Agricultural machines, tractors, sprayers, round vehicles, cyclo-loaders, HDS loaders, construction machinery, loaders, excavators, sweepers, industrial machines and other hydraulically controlled devices. Recommended oil flow: 0 – 80 l / min. Example control: two 2-way drives. Possibility of serial connection to the existing system (pressure sleeve required). Joystick with five positions (1 – 2 – 0 – 3 – 4) on the spring, i. Position 0 neutral (joystick positioned vertically) piston rods of both drives are stationary – oil overflows. Working position 1 (joystick lever tilted forward) The piston rod of the first actuator extends. Working position 2 (joystick lever in an inclined position) The piston rod of the first drive is retracted. Working position 3 (joystick lever inclined to the left) The piston rod of the other drive extends. Working position 4 (joystick lever inclined to the right) The piston rod of the other drive is retracted. Return to the tank (T): BSPP 3/4 female thread. Outlet for section (A, B): BSPP 1/2 female thread. Series connection (N): BSPP 3/4 female thread. Maximum pressure on the supply: 250bar. Maximum return pressure: 50 bar. Maximum pressure on the sections: 300 bar. The overflow valve is factory-set to 175 bar. Possibility of self-regulation, full turnover change by 30bar. Dimensions can be changed slightly.

Comments Off

Tags: 21gpm, bank, control, directional, double, hydraulic, joystick, valve

Categories: bank

Bucher HDS15, 1-10 Bank, 1/2, 60L, D/Acting Spring, Directional Hydraulic Valve June 5, 2025

Bucher-HDS15-1-10-Bank-1-2-60L-D-Acting-Spring-Directional-Hydraulic-Valve-01-hqq

Subscribe to our newsletter to get all the latest and exclusive offers. DOUBLE ACTING FIXED PIN HOLES. DOUBLE ACTING SPHERICAL ENDS. DOUBLE ACTING MICRO CYLINDER. DOUBLE ACTING LOG SPLITTER. TOP LINK FIXED MOUNT. TOP LINK AUTOMATIC HITCH. TOP LINK STANDARD MOUNT. PILOT OPERATED CHECK VALVES. FLOW CONTROL & DIVIDER VALVES. RELIEF & REGENERATIVE VALVES. BOLT ON VALVES FOR MOTORS. REDUCING & SEQUENCE VALVES. 2 PUMP HI-LO UNLOADING VALVES. DC PRESSURE & TANK CIRCUIT. AC PRESSURE & TANK CIRCUIT. DC MOTOR PUMPS SETS. GEAR PUMPS WITH CONNECTORS. GALTECH MULTIPLE GEAR PUMPS. TWO STAGE HI-LOW GEAR PUMPS. TWO STAGE HI-LOW GEAR PUMP KIT. PISTON & VANE PUMPS. TANK TOP RETURN FILTERS. LOW PRESSURE INLINE FILTER. HYDRAULIC QUICK RELEASE COUPLINGS. HYDRAULIC ISO A QRCS. HYDRAULIC FLAT FACE QRCS. HYDRAULIC CYLINDERS / RAMS. BUCHER UP100 AC POWER UNITS. FLOWFIT GM10 90L SPARES. SLICE VALVES – 3/4 BSP PORTS. SLICE VALVES – 3/8 BSP PORTS. FLOWFIT 3/4 160L/MIN VALVES. FLOWFIT 3/8 45L/MIN VALVES. MONOBLOCK VALVES-1/2 BSP PORTS. BUCHER HDM18 & HDM25 SPARES. SLICE VALVES – 1 BSP PORTS. FLOWFIT 1/2 45-90L/MIN VALVES. GALTECH 1/4 15-25L/MIN VALVES. GALTECH 3/8 40-50L/MIN VALVES. MONOBLOCK VALVES-1/4 BSP PORTS. MONOBLOCK VALVES-3/8 BSP PORTS. GALTECH 3/4 120L/MIN VALVES. MONOBLOCK VALVES-3/4 BSP PORTS. GALTECH 1/2 60L/MIN VALVES. BUCHER 3/4 100L/MIN VALVES. GALTECH 1/2 80-90L/MIN VALVES. GALTECH GMV15 & Q15 SPARES. BUCHER 1/2 45-70L/MIN VALVES. BUCHER 3/8 40-45L/MIN VALVES. BUCHER HDM140 & HDM11 SPARES. GALTECH Q80 SLICE VALVES. GALTECH Q75 & Q95 SPARES. SLICE VALVES – 1/2 BSP PORTS. GALTECH Q25 & Q45 SPARES. BELL HOUSING & DRIVE COUPLINGS. PETROL ENGINE ADAPTOR KITS. ELECTRIC MOTOR ADAPTOR KITS. PTO GEARBOX & PUMP ASSEMBLIES. ELECTRIC MOTORS & DRIVES. AC VARIABLE SPEED DRIVES. HYD QUICK RELEASE COUPLINGS. CETOP 7 SOLENOID VALVES. CETOP 3 SUBPLATES & MANIFOLDS. CETOP 10 SOLENOID VALVES. CETOP 3 MANUAL OPERATED VALVES. CETOP 8 MODULAR SANDWICH VALVE. MODULAR FLOW CONTROL VALVES. CETOP 5 SOLENOID VALVES. CETOP 8 SOLENOID VALVES. CETOP 5 MODULAR SANDWICH VALVE. CETOP 5 MANIFOLDS & SUBPLATES. CETOP 3 SOLENOID VALVES. CETOP 7 MODULAR SANDWICH VALVE. CETOP 3 MODULAR SANDWICH VALVE. HYDRAULIC HOSE & ADAPTORS. HYD ADAPTORS & BONDED SEALS. TEES & CROSS ADAPTORS. MALE x FIXED FEMALE. ADAPTOR AND BONDED SEAL KITS. PLUGS, CAPS & CRIMP NUTS. SWIVEL FEMALE x SWIVEL FEMALE. O’RING FACE SEAL. MALE x SWIVEL FEMALE ADAPTORS. SWEPTS, PUSH-INS & HOSE-TAILS. MALE x MALE ADAPTORS. HAND OPERATED HOSE CRIMPERS. ACCESSORIES FOR HOSE CRIMPERS. HOSE AND TUBE CLEANING. HYD TANKS WITH ACCESSORIES. HI-LOW GEAR PUMP KITS. BELL HOUSING & COUPLINGS. PETROL & DIESEL ENGINES. HONDA ENGINE ADAPTOR KITS. LONCIN ENGINE ADAPTOR KITS. Hydraulic 100mm Rear Gauges. Pneumatic 40mm Rear Gauges. Hydraulic 100mm Base Gauges. Pneumatic 50mm Base Gauges. Hydraulic 63mm Base Gauges. Pneumatic 40mm Base Gauges. Hydraulic 63mm Rear Gauges. Pneumatic 50mm Rear Gauges. PRESSURE GAUGE HOSE TEST KITS. Hydraulic 100mm Test Kits. Hydraulic 63mm Gauge Test Kits. GRANUELS & SPILL KITS. VEHICLE PTO & PUMP KITS. FAAM PTO AND PUMP KITS. LAND ROVER PTO AND PUMP KITS. PEUGEOT PTO AND PUMP KITS. OPEL PTO AND PUMP KITS. KIA PTO AND PUMP KITS. FORD PTO AND PUMP KITS. RENAULT PTO AND PUMP KITS. MAZDA PTO AND PUMP KITS. IVECO PTO AND PUMP KITS. VOLKSWAGEN PTO AND PUMP KITS. VAUXHALL PTO AND PUMP KITS. CITROEN PTO AND PUMP KITS. MERCEDES PTO AND PUMP KITS. MITSUBISHI PTO AND PUMP KITS. FIAT PTO AND PUMP KITS. ISUZU PTO AND PUMP KITS. HYUNDAI PTO AND PUMP KITS. TOYOTA PTO AND PUMP KITS. Walvoil Q80 Anti Shock Port Relief Cartridge Valve, 30 – 250 Bar. Bucher HDS11, 1-10 Bank, 3/8, 45L, D/Acting Spring, Directional Hydraulic Valve. Bucher HDS15, 1-10 Bank, 1/2, 60L, D/Acting Spring, Directional Hydraulic Valve. Bucher HDS15, 1-10 Bank, 1/2, 60L/Min, Double Acting Spring Return, Directional Hydraulic Valve. All valve options shown are for open centre applications only, Please ask our technical department for closed centre options. Max Flow Rate: 60 L/Min. Max continuous operating pressure supply port P: 250 Bar (3600 PSI). Max intermittent peak pressure work port A/B: 320 Bar (4600 PSI). Max back pressure tank port T: 30 Bar (430 PSI). Oil temperature: °C -10 to +80. Oil viscosity: mm2s 16 to 75. Number of spools: 1 to 10. Body: High strength cast-iron. Spool: Hardened steel – chrome plated. Internal load holding check valves (prevent reverse flow through valve when shifting). Balanced interchangeable spools (provides minimum leakage, smooth operation). Wide selection inlets, work ports, and outlets threaded ports. Negative overlapping of the spool. Optional features available please contact sales department. Bucher 1/2 BSP, 45 l/min Hose-Reel Monoblock Valve without Flow Control HDM11S. Hydraulic Slice Valve, 3 Bank 1/2 BSP 60 l/min Double Acting Spring Return HDS15. Bucher 4 Bank 1/2 BSP 45 l/min Double Acting Cylinder Spool Hydraulic Monoblock Valve. Bucher 5 Bank 1/2 BSP 45 l/min Double Acting Cylinder Spool Hydraulic Monoblock Valve. VIEW OUR CUSTOMERS FEEDBACK. I had to ask a dumb question, and they could not have been more helpful. Price good too, and the description including about whether or not these diverter valves are open centre or not. That is hugely important if you want to avoid a wrecked hydraulic pump! Not all sellers tell you that. La livraison a été rapide mais en ouvrant le carton, la cuve était éventrée.

Comments Off

Tags: 1-10, bank, bucher, dacting, directional, hds15, hydraulic, spring, valve

Categories: bucher

1 spool hydraulic valve 1 Bank Hydraulic Directional Control Lever Valve 20MPa June 1, 2025

1-spool-hydraulic-valve-1-Bank-Hydraulic-Directional-Control-Lever-Valve-20MPa-01-so

1 Spool Hydraulic Directional Control Valve 11 GPM 40L/min 20MPa for Tractors. Ame:P40 1 spool hydraulic valve. Control valve switch (can control the number of cylinders):1. Reatest pressure:31.5MPa. Ange of working temperature:-20°C+80°C. Working fluid viscosity range:10400mm2/S. The valve body is integrally cast from forging. The maximum pressure is 31.5MPa and the maximum flow is 40L/min. Has the function of regulating pressure. With anti-hydraulic backflow, reversing valve function. The hydraulic valve has good sealing performance. The valve body is integrally casted by forging, which has good sealing performance and does not leak oil. It has the function of regulating the pressure, preventing the oil from flowing backward and reversing. Operate with a reversing handle for parallel or series oil circuits. Widely used in forklifts, small factory machinery, small agricultural machinery, small hydraulic presses, punching machines, and other processing equipment.

Comments Off

Tags: 20mpa, bank, control, directional, hydraulic, lever, spool, valve

Categories: spool

7 Bank Hydraulic Directional Valve for Forest Crane Logging Trailer 90L 2xJoy ex May 12, 2025

7-Bank-Hydraulic-Directional-Valve-for-Forest-Crane-Logging-Trailer-90L-2xJoy-ex-01-eb

NOTE: We issue VAT invoices for countries in the European Union. 7 Bank Hydraulic Directional Valve for Forest Crane Logging Trailer 90L 2xJoy. The distributor is adapted to different machine types, such as B. Forest machines, tractors, field sprayers, rotors, HDS loaders, construction machines, loaders, excavators, sweepers, industrial machines and other hydraulically controlled devices. Recommended system oil flow: 0 – 90l / min. Control example: eight double-acting cylinders. Can be connected in series to an existing system (pressure sleeve required). Recommended system oil flow: 0 – 90 l / min. Example control: 2-sided drive. Both joysticks with five positions (1 – 2 – 0 – 3 – 4) are spring-loaded, i. You return to the vertical yourself. Position 0 neutral (vertical joystick) piston rods of both cylinders are stationary – oil flows to the overflow. Working position 1 (joystick lever in forward position) The piston rod of the first cylinder extends. Working position 2 (joystick lever tilted backwards) The piston rod of the first cylinder retracts. Working position 3 (joystick lever inclined to the left) The piston rod of the second cylinder extends. Working position 4 (joystick lever inclined to the right) The piston rod of the second cylinder retracts. All three position levers (1 – 0 – 2) are spring loaded, i. Position 0 neutral (lever in vertical position) cylinder piston rod is stationary – oil overflows. Working position 1 (lever in forward position) The cylinder piston extends. The 2 working position (lever backwards) of the piston rod of the cylinder retracts. The lever can be positioned parallel or perpendicular to the joysticks. Pump supply (P): BSP 1 / 2“internal thread return to the tank (T): BSP 3 / 4”internal thread section outlet (A, B): BSP 1 / 2”internal thread. Maximum inlet pressure: 250 bar Maximum return pressure: 50 bar Maximum pressure on the sections: 300 bar. Factory set relief valve to 175Bar Self-adjusting, full rotation, change by 30Bar.

Comments Off

Tags: 2xjoy, bank, crane, directional, forest, hydraulic, logging, trailer, valve

Categories: bank

6 BANK Hydraulic Directional Valve 2x JOYSTICK 11gpm 40L 5x Double 1x Single SA May 11, 2025

6-BANK-Hydraulic-Directional-Valve-2x-JOYSTICK-11gpm-40L-5x-Double-1x-Single-SA-01-ymua

NOTE: We issue VAT invoices for countries in the European Union. HYDRAULIC DISTRIBUTOR 6 SECTION P40 4x Double Acting. CONTROL BY BUILT-IN JOYSTICKx2. Symbol: 06P40 5xA1C1 + 2x JOY. It is widely used in hydraulic systems in agriculture, horticulture, forestry, construction, and well-known industries. The distributor is adapted to different types of machines, such as B. Agricultural machines, tractors, sprayers, round vehicles, cyclo-loaders, HDS loaders, construction machinery, loaders, excavators, sweepers, industrial machines and other hydraulically controlled devices. Recommended oil flow: 0 – 40 l / min. Example control: two 2-way drives. Possibility of serial connection to the existing system (pressure sleeve required). Joystick with five positions (1 – 2 – 0 – 3 – 4) on the spring, i. Position 0 neutral (joystick positioned vertically) piston rods of both drives are stationary – oil overflows. Working position 1 (joystick lever tilted forward) The piston rod of the first actuator extends. Working position 2 (joystick lever in an inclined position) The piston rod of the first drive is retracted. Working position 3 (joystick lever inclined to the left) The piston rod of the other drive extends. Working position 4 (joystick lever inclined to the right) The piston rod of the other drive is retracted. Pump supply (P1, P2): BSP 1/2 internal thread. Back to the tank (T1, T2): BSP 1/2 internal thread. Sections (A1, A2; B1, B2): BSP 3/8 internal thread. Serial connection (N): BSP 1/2 internal thread. Maximum pressure on the supply: 250bar. Maximum return pressure: 50 bar. Maximum pressure on the sections: 300 bar. The overflow valve is factory-set to 175 bar. Possibility of self-regulation, full turnover change by 30bar.

Comments Off

Tags: 11gpm, bank, directional, double, hydraulic, joystick, single, valve

Categories: bank

6 BANK Hydraulic Directional Control Valve 2xJOYSTICK 11gpm 40L 6xDA ex May 9, 2025

6-BANK-Hydraulic-Directional-Control-Valve-2xJOYSTICK-11gpm-40L-6xDA-ex-01-mt

NOTE: We also issue VAT invoices on request. 6 Bank Hydraulic Directional Control Valves 6 x Double Acting 40L 11gpm. HYDRAULIC DISTRIBUTOR 6 SECTION P40. CONTROL BY BUILT-IN JOYSTICKx2. Symbol: 06P40 6xA1+ 2x JOY. It is widely used in hydraulic systems in agriculture, horticulture, forestry, construction, and well-known industries. The distributor is adapted to different types of machines, such as B. Agricultural machines, tractors, sprayers, round vehicles, cyclo-loaders, HDS loaders, construction machinery, loaders, excavators, sweepers, industrial machines and other hydraulically controlled devices. Recommended oil flow: 0 – 40 l / min. Example control: two 2-way drives. Possibility of serial connection to the existing system (pressure sleeve required). Joystick with five positions (1 – 2 – 0 – 3 – 4) on the spring, i. Position 0 neutral (joystick positioned vertically) piston rods of both drives are stationary – oil overflows. Working position 1 (joystick lever tilted forward) The piston rod of the first actuator extends. Working position 2 (joystick lever in an inclined position) The piston rod of the first drive is retracted. Working position 3 (joystick lever inclined to the left) The piston rod of the other drive extends. Working position 4 (joystick lever inclined to the right) The piston rod of the other drive is retracted. Pump supply (P1, P2): BSP 1/2 internal thread. Back to the tank (T1, T2): BSP 1/2 internal thread. Sections (A1, A2; B1, B2): BSP 3/8 internal thread. Serial connection (N): BSP 1/2 internal thread. Maximum pressure on the supply: 250bar. Maximum return pressure: 50 bar. Maximum pressure on the sections: 300 bar. The overflow valve is factory-set to 175 bar. Possibility of self-regulation, full turnover change by 30bar.

Comments Off

Tags: 11gpm, 2xjoystick, 6xda, bank, control, directional, hydraulic, valve

Categories: bank

1x FLOATING 6 Bank Hydraulic Directional Control Valves 5xDA Double 40L 11gpm ex May 4, 2025

1x-FLOATING-6-Bank-Hydraulic-Directional-Control-Valves-5xDA-Double-40L-11gpm-ex-01-zlo

NOTE: We issue VAT invoices for countries in the European Union. 6 Spool Hydraulic Directional Control Valve 11gpm 40L. 1x FLOATING Double Acting. 5x Double Acting Cylinder DA. 06P40 5xA1 K16 GKZ1. Hydraulic distributors are guaranteed for 2 years. It is used in hydraulic systems in agriculture, horticulture, forestry, construction and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, front loaders, construction machines, loaders, excavators, sweepers, industrial machines and for other applications hydraulically controlled. Recommended oil flow in the system: 0-40L / min. Control example: double-acting hydraulic cylinder. Possibility of series connection to the existing system (requires connection of a pressure sleeve). Three-position lever (1-0-2), spring-loaded, ie it moves back into the vertical position. Neutral position 0 (lever up), piston rod of the hydraulic cylinder is stationary – oil overflows. Working position 1 (lever up), the piston rod of the hydraulic cylinder slides out. Working position 2 (lever up), the piston rod of the hydraulic cylinder retracts. Pump supply (P): female thread BSP 1/2. Return to tank (T). Female thread BSP 1/2. Output for sections (A, B). Female thread BSP 3/8. Pressure range Maximum supply pressure: 250 bar. Maximum return pressure: 50 bar. Maximum pressure in sections: 300bar. Bypass valve (safety) set at the factory to 175 bar. Self-adjusting, full turn 30 bar displacement. Permissible ambient temperature: 40 ° C to + 60 ° C. Permissible oil temperature: 15 ° C to + 80 ° C. Dimensions can be changed slightly.

Comments Off

Tags: 11gpm, 5xda, bank, control, directional, double, floating, hydraulic, valves

Categories: floating

4 BANK Hydraulic Directional Valve JOYSTICK 11gpm 40L 1x Single 3x double acting May 3, 2025

4-BANK-Hydraulic-Directional-Valve-JOYSTICK-11gpm-40L-1x-Single-3x-double-acting-01-sit

NOTE: We also issue VAT invoices on request. 4 Bank Hydraulic Directional Control Valves JOYSTICK 1x Single Acting 1 x Double Acting 40L 11gpm. HYDRAULIC DISTRIBUTOR 4 SECTION P40. CONTROL BY BUILT-IN JOYSTICK. Symbol: 04P40 A1A1A1A1+ JOY. It is widely used in hydraulic systems in agriculture, horticulture, forestry, construction, and well-known industries. The distributor is adapted to different types of machines, such as B. Agricultural machines, tractors, sprayers, round vehicles, cyclo-loaders, HDS loaders, construction machinery, loaders, excavators, sweepers, industrial machines and other hydraulically controlled devices. Recommended oil flow: 0 – 40 l / min. Example control: two 2-way drives. Possibility of serial connection to the existing system (pressure sleeve required). Joystick with five positions (1 – 2 – 0 – 3 – 4) on the spring, i. Position 0 neutral (joystick positioned vertically) piston rods of both drives are stationary – oil overflows. Working position 1 (joystick lever tilted forward) The piston rod of the first actuator extends. Working position 2 (joystick lever in an inclined position) The piston rod of the first drive is retracted. Working position 3 (joystick lever inclined to the left) The piston rod of the other drive extends. Working position 4 (joystick lever inclined to the right) The piston rod of the other drive is retracted. Pump supply (P1, P2): BSP 1/2 internal thread. Back to the tank (T1, T2): BSP 1/2 internal thread. Sections (A1, A2; B1, B2): BSP 3/8 internal thread. Serial connection (N): BSP 1/2 internal thread. Maximum pressure on the supply: 250bar. Maximum return pressure: 50 bar. Maximum pressure on the sections: 300 bar. The overflow valve is factory-set to 175 bar. Possibility of self-regulation, full turnover change by 30bar.

Comments Off

Tags: 11gpm, acting, bank, directional, double, hydraulic, joystick, single, valve

Categories: bank

1x FLOATING 4 Bank Hydraulic Directional Control Valves 80L 21 gpm Double ex May 2, 2025

NOTE: We issue VAT invoices for countries in the European Union. 4 BANK HYDRAULIC MONOBLOCK DIRECTIONAL SPOOL VALVE 4x Double Acting Cylinder +floating spool. Hydraulic distributors are guaranteed for 2 years. It is used in hydraulic systems in agriculture, horticulture, forestry, construction and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, front loaders, construction machines, loaders, excavators, sweepers, industrial machines and for other applications hydraulically controlled. Recommended oil flow in the system: 0-80L / min. Control example: double-acting hydraulic cylinder. Possibility of series connection to the existing system (requires connection of a pressure sleeve). Three-position lever (1-0-2), spring-loaded, ie it moves back into the vertical position. Neutral position 0 (lever up), piston rod of the hydraulic cylinder is stationary – oil overflows. Working position 1 (lever up), the piston rod of the hydraulic cylinder slides out. Working position 2 (lever up), the piston rod of the hydraulic cylinder retracts. Pump supply (P): female thread BSPP 3/4 ” (Sometimes BSPP 1/2″). Return to tank (T). Female thread BSPP 3/4. Output for sections (A, B). Female thread BSPP 1/2. Pressure range Maximum supply pressure: 250 bar. Maximum return pressure: 50 bar. Maximum pressure in sections: 300bar. Bypass valve (safety) set at the factory to 175 bar. Self-adjusting, full turn 30 bar displacement. Permissible ambient temperature: 40 ° C to + 60 ° C. Permissible oil temperature: 15 ° C to + 80 ° C. Dimensions can be changed slightly.

Comments Off

Tags: bank, control, directional, double, floating, hydraulic, valves

Categories: floating

July 2025
M	T	W	T	F	S	S
« Jun
	1	2	3	4	5	6
7	8	9	10	11	12	13
14	15	16	17	18	19	20
21	22	23	24	25	26	27
28	29	30	31