Hydraulic Valve Direction

1x Single 2 Bank Hydraulic Directional Control Valves JOYSTICK 1x DA 40L 11gpm July 15, 2021

NOTE: We also issue VAT invoices on request. 1x Single Acting 2 Bank Hydraulic Directional Control Valves JOYSTICK 1xDA 40L 11gpm. HYDRAULIC DISTRIBUTOR 2 SECTION P40 1 xSA 1xDA. CONTROL BY BUILT-IN JOYSTICK. Symbol: 02P40 A1C1 + JOY. It is widely used in hydraulic systems in agriculture, horticulture, forestry, construction, and well-known industries. The distributor is adapted to different types of machines, such as B. Agricultural machines, tractors, sprayers, round vehicles, cyclo-loaders, HDS loaders, construction machinery, loaders, excavators, sweepers, industrial machines and other hydraulically controlled devices. Recommended oil flow: 0 – 40 l / min. Example control: two 2-way drives. Possibility of serial connection to the existing system (pressure sleeve required). Joystick with five positions (1 – 2 – 0 – 3 – 4) on the spring, i. Position 0 neutral (joystick positioned vertically) piston rods of both drives are stationary – oil overflows. Working position 1 (joystick lever tilted forward) The piston rod of the first actuator extends. Working position 2 (joystick lever in an inclined position) The piston rod of the first drive is retracted. Working position 3 (joystick lever inclined to the left) The piston rod of the other drive extends. Working position 4 (joystick lever inclined to the right) The piston rod of the other drive is retracted. Pump supply (P1, P2): BSP 1/2 internal thread. Back to the tank (T1, T2): BSP 1/2 internal thread. Sections (A1, A2; B1, B2): BSP 3/8 internal thread. Serial connection (N): BSP 1/2 internal thread. Maximum pressure on the supply: 250bar. Maximum return pressure: 50 bar. Maximum pressure on the sections: 300 bar. The overflow valve is factory-set to 175 bar. Possibility of self-regulation, full turnover change by 30bar. The item “1x Single 2 Bank Hydraulic Directional Control Valves JOYSTICK 1x DA 40L 11gpm” is in sale since Tuesday, February 2, 2021. This item is in the category “Business, Office & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Valves & Manifolds\Directional Control Valves\Spool Valves”. The seller is “hydraulic-center” and is located in Torun. This item can be shipped worldwide.

Suitable Media: Oil
Spool Count: 2-Spool
MPN: 02P40 A1C1 + JOY
Port Diameter: 3/8 in 1/2 in
Valve Operation: Manual
Brand: Perfect Hydraulic
Maximum Flow Rate: 12 gpm

Comments Off

Tags: 11gpm, bank, control, directional, hydraulic, joystick, single, valves

Categories: single

4 Bank Ways Lever Hydraulic Directional Flow Spool Valve July 14, 2021

Comes only with one lever/handle, new with some marks on it, comes as pictured. IF YOU HAVE ANY ISSUES WITH THE ORDER PLEASE MESSAGE ME FIRST. Take photos of the exact item that you will get, unless I state otherwise. Please look at ALL the pictures. I try to match CURRENT cheaper price (I dont match past prices). The item “4 Bank Ways Lever Hydraulic Directional Flow Spool Valve” is in sale since Monday, June 7, 2021. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Valves & Manifolds\Other Valves & Manifolds”. The seller is “topparts8″ and is located in Athens, Georgia. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.

MPN: 4P40
Brand: Top Part Valves

Comments Off

Tags: bank, directional, flow, hydraulic, lever, spool, valve, ways

Categories: bank

5 BANK Hydraulic Directional Control Valve 2x JOYSTICK 21gpm 80L 5x Double 5xDA July 10, 2021

NOTE: We issue VAT invoices for countries in the European Union. HYDRAULIC DISTRIBUTOR 5 SECTION P80 5x Double Acting. CONTROL BY BUILT-IN 2x JOYSTICK. Symbol: 05P80 5xA1 + 2xJOY. It is widely used in hydraulic systems in agriculture, horticulture, forestry, construction, and well-known industries. The distributor is adapted to different types of machines, such as B. Agricultural machines, tractors, sprayers, round vehicles, cyclo-loaders, HDS loaders, construction machinery, loaders, excavators, sweepers, industrial machines and other hydraulically controlled devices. Recommended oil flow: 0 – 80 l / min. Example control: two 2-way drives. Possibility of serial connection to the existing system (pressure sleeve required). Joystick with five positions (1 – 2 – 0 – 3 – 4) on the spring, i. Position 0 neutral (joystick positioned vertically) piston rods of both drives are stationary – oil overflows. Working position 1 (joystick lever tilted forward) The piston rod of the first actuator extends. Working position 2 (joystick lever in an inclined position) The piston rod of the first drive is retracted. Working position 3 (joystick lever inclined to the left) The piston rod of the other drive extends. Working position 4 (joystick lever inclined to the right) The piston rod of the other drive is retracted. Return to the tank (T): BSPP 3/4 female thread. Outlet for section (A, B): BSPP 1/2 female thread. Series connection (N): BSPP 3/4 female thread. Maximum pressure on the supply: 250bar. Maximum return pressure: 50 bar. Maximum pressure on the sections: 300 bar. The overflow valve is factory-set to 175 bar. Possibility of self-regulation, full turnover change by 30bar. Dimensions can be changed slightly. The item “5 BANK Hydraulic Directional Control Valve 2x JOYSTICK 21gpm 80L 5x Double 5xDA” is in sale since Thursday, February 18, 2021. This item is in the category “Business, Office & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Valves & Manifolds\Directional Control Valves\Spool Valves”. The seller is “hydraulic-center” and is located in Torun. This item can be shipped worldwide.

Suitable Media: Oil
Spool Count: 5-Spool
MPN: 05P80 5xA1 + 2x JOY
Port Diameter: 3/8 inch, 1/2 inch
Valve Operation: Manual
Maximum Pressure: 4500 psi
Brand: Perfect Hydraulic
Maximum Flow Rate: 21 gpm

Comments Off

Tags: 21gpm, 5xda, bank, control, directional, double, hydraulic, joystick, valve

Categories: bank

5 Bank Hydraulic Monoblock Directional Spool Valve 1/2 Bsp 80 L/m 300 Bar July 4, 2021

5-Bank-Hydraulic-Monoblock-Directional-Spool-Valve-1-2-Bsp-80-L-m-300-Bar-01-xak

1/2 BSP 5 LEVER HYDRAULIC DIRECTIONAL VALVE – 80 L/M. THIS IS WHAT WE SELL TO ORIGINAL EQUIPMENT VEHICLE BUILDERS. WE WILL ONLY RECOMEND THIS QUALITY VALVE NOT CHEAPER LIGHTER WEIGHT/DUTY VALVES. HIGH STRENGTH CAST IRON. HARD CHROME PLATED SPOOLS. TO SUIT DOUBLE ACTING CYLINDER. 1/2 BSP CONTROL PORTS. THE VALVE HAS 1/2 BSP PUMP (INPUT/PRESSURE) PORT. TANK/RETURN PORT IS 3/4 BSP. NOMINAL FLOW = 80 LITRES PER MINUTE. MAXIMUM OPERATING PRESSURE = 300 BAR. MAXIMUM PRESSURE’P’ PORT = 250 BAR. MAXIMUM PRSSURE’A&B’ PORTS = 300 BAR. MAXIMUM PRESSURE’T’ (RETURN) = 50 BAR. WILL OPERATE 5 DOUBLE ACTING CYLINDERS. SPRING RETURN IN ALL POSITIONS – FORWARD, NEUTRAL & REVERSE. FLOW WILL UNLOAD FROM PRESSURE TO TANK IN CENTRE POSITION. SUITABLE FOR ALL HYDRAULIC APPLICATIONS. Perfect Control for the following applications:- Refuse (Garbage) Trucks, Agricultural Machinery, Skip Trucks, Recovery Vehicles, Hydraulic Platforms, Hydraulic Presses, Concrete Pumps, Front-End Loaders. MAINLAND UK POST CODES – NOT HS/IV/PA/PH/AB/KA27-28/Highlands & Islands (OUT OF AREA). The item “5 BANK HYDRAULIC MONOBLOCK DIRECTIONAL SPOOL VALVE 1/2 BSP 80 L/M 300 BAR” is in sale since Wednesday, June 16, 2021. This item is in the category “Business, Office & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Other Hydraulics & Pneumatics”. The seller is “ptosdirect-com” and is located in Leeds, West Yorkshire. This item can be shipped to all countries in Europe, United States, Antigua and barbuda, Australia, Bahrain, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Indonesia, Malaysia, Mexico, Singapore, South Korea, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guadeloupe, Grenada, French guiana, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Sri lanka, Macao, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Chile, Bahamas, Colombia, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, Trinidad and tobago, Uruguay, Viet nam.

Country/Region of Manufacture: United Kingdom
Item: Valves
Brand: POWERTRANSJ
Sub-Type: Hydraulic
Manufacturer Part Number: 5P80
Intended Use: Modification/ Enhancement
Type: Hydraulic

Comments Off

Tags: bank, directional, hydraulic, monoblock, spool, valve

Categories: bank

1x for Hydraulic Motors 4 Bank Hydraulic Directional Control Valve 11gpm 40L DA July 1, 2021

1x-for-Hydraulic-Motors-4-Bank-Hydraulic-Directional-Control-Valve-11gpm-40L-DA-01-df

NOTE: We issue VAT invoices for countries in the European Union. 4 SPOOL HYDRAULIC MONOBLOCK DIRECTIONAL VALVE 3x. Double Acting Cylinder 1x. Distributor with clip for hydraulic motor 04P40 A1A1A1D8 GKZ1. Hydraulic distributors are guaranteed for 2 years. It is used in hydraulic systems in agriculture, horticulture, forestry, construction and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, front loaders, construction machines, loaders, excavators, sweepers, industrial machines and for other applications hydraulically controlled. The distributor is ideal for controlling a hydraulic motor thanks to a lever with a snap mechanism. You can start the engine and exit the hydraulic distributor without constantly holding the lever. Control example: hydraulic motor in both directions and hydraulic cylinder in two-way operation. Recommended oil flow in the system: 0-40L / min. Hydraulic motor in both directions and hydraulic cylinders in two-way operation. Possibility of series connection to the existing system (requires connection of a pressure sleeve). Three-position lever (1 – 0 – 2), with snap lock, ie it holds the position in the working position. Position 0 neutral (lever in vertical position) Motor or actuator is at a standstill – oil overflows. Position 1 works (lever in diagonal forward position) Motor turns to the left or piston rod extends Position 2 works (lever in diagonal reverse position) The motor turns to the right or the piston rod of the actuator retracts. Pump supply (P): female thread BSP 1/2. Return to tank (T). Female thread BSP 1/2. Output for sections (A, B). Female thread BSP 3/8. Pressure range Maximum supply pressure: 250 bar. Maximum return pressure: 50 bar. Maximum pressure in sections: 300bar. Bypass valve (safety) set at the factory to 175 bar. Self-adjusting, full turn 30 bar displacement. Permissible ambient temperature: 40 ° C to + 60 ° C. Permissible oil temperature: 15 ° C to + 80 ° C. Dimensions can be changed slightly. The item “1x for Hydraulic Motors 4 Bank Hydraulic Directional Control Valve 11gpm 40L DA” is in sale since Sunday, January 31, 2021. This item is in the category “Business, Office & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Valves & Manifolds\Directional Control Valves\Spool Valves”. The seller is “hydraulic-center” and is located in Torun. This item can be shipped worldwide.

Suitable Media: Oil
Spool Count: 4-Spool
MPN: 04P40 A1A1A1D8 GKZ1
Port Diameter: 3/8 inch, 1/2 inch
Valve Operation: Manual
Maximum Pressure: 4500 psi
Brand: Perfect Hydraulic
Maximum Flow Rate: 12 gpm

Comments Off

Tags: 11gpm, bank, control, directional, hydraulic, motors, valve

Categories: hydraulic

4 Bank Hydraulic Monoblock Directional Spool Valve 1/2 Bsp 80 L/m 300 Bar June 29, 2021

4-Bank-Hydraulic-Monoblock-Directional-Spool-Valve-1-2-Bsp-80-L-m-300-Bar-01-fuhb

1/2 BSP 4 LEVER HYDRAULIC DIRECTIONAL VALVE – 80 L/M. THIS IS WHAT WE SELL TO ORIGINAL EQUIPMENT VEHICLE BUILDERS. WE WILL ONLY RECOMEND THIS QUALITY VALVE NOT CHEAPER LIGHTER WEIGHT/DUTY VALVES. HIGH STRENGTH CAST IRON. HARD CHROME PLATED SPOOLS. TO SUIT DOUBLE ACTING CYLINDER. 1/2 BSP CONTROL PORTS. THE VALVE HAS 1/2 BSP PUMP (INPUT/PRESSURE) PORT. TANK/RETURN PORT IS 3/4 BSP. NOMINAL FLOW = 80 LITRES PER MINUTE. MAXIMUM OPERATING PRESSURE = 300 BAR. MAXIMUM PRESSURE’P’ PORT = 250 BAR. MAXIMUM PRSSURE’A&B’ PORTS = 300 BAR. MAXIMUM PRESSURE’T’ (RETURN) = 50 BAR. WILL OPERATE 4 DOUBLE ACTING CYLINDER. SPRING RETURN IN ALL POSITIONS – FORWARD, NEUTRAL & REVERSE. FLOW WILL UNLOAD FROM PRESSURE TO TANK IN CENTRE POSITION. SUITABLE FOR ALL HYDRAULIC APPLICATIONS. Perfect Control for the following applications:- Refuse (Garbage) Trucks, Agricultural Machinery, Skip Trucks, Recovery Vehicles, Hydraulic Platforms, Hydraulic Presses, Concrete Pumps, Front-End Loaders. MAINLAND UK POST CODES – NOT HS/IV/PA/PH/AB/KA27-28 (OUT OF AREA). The item “4 BANK HYDRAULIC MONOBLOCK DIRECTIONAL SPOOL VALVE 1/2 BSP 80 L/M 300 BAR” is in sale since Wednesday, May 19, 2021. This item is in the category “Business, Office & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Other Hydraulics & Pneumatics”. The seller is “ptosdirect-com” and is located in Leeds, West Yorkshire. This item can be shipped to all countries in Europe, United States, Antigua and barbuda, Australia, Bahrain, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Indonesia, Malaysia, Mexico, Singapore, South Korea, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guadeloupe, Grenada, French guiana, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Sri lanka, Macao, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Chile, Bahamas, Colombia, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, Trinidad and tobago, Uruguay, Viet nam.

Country/Region of Manufacture: United Kingdom
Item: Valves
Brand: POWERTRANSJ
Intended Use: Modification/ Enhancement
Sub-Type: Hydraulic
Manufacturer Part Number: 4P80
Type: Hydraulic

Comments Off

Tags: bank, directional, hydraulic, monoblock, spool, valve

Categories: bank

2x FLOATING spool 2 Bank Hydraulic Directional Control Valve 11gpm 40L 2x DA June 27, 2021

2x-FLOATING-spool-2-Bank-Hydraulic-Directional-Control-Valve-11gpm-40L-2x-DA-01-bp

NOTE: We issue VAT invoices for countries in the European Union. 2 Spool Hydraulic Directional Control Valve 11gpm 40L 2. X FLOATING Double Acting. 1x Double Acting Cylinder DA. Hydraulic distributors are guaranteed for 2 years. It is used in hydraulic systems in agriculture, horticulture, forestry, construction and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, front loaders, construction machines, loaders, excavators, sweepers, industrial machines and for other applications hydraulically controlled. Recommended oil flow in the system: 0-40L / min. Control example: double-acting hydraulic cylinder. Possibility of series connection to the existing system (requires connection of a pressure sleeve). Three-position lever (1-0-2), spring-loaded, ie it moves back into the vertical position. Neutral position 0 (lever up), piston rod of the hydraulic cylinder is stationary – oil overflows. Working position 1 (lever up), the piston rod of the hydraulic cylinder slides out. Working position 2 (lever up), the piston rod of the hydraulic cylinder retracts. Pump supply (P): female thread BSP 1/2. Return to tank (T). Female thread BSP 1/2. Output for sections (A, B). Female thread BSP 3/8. Pressure range Maximum supply pressure: 250 bar. Maximum return pressure: 50 bar. Maximum pressure in sections: 300bar. Bypass valve (safety) set at the factory to 175 bar. Self-adjusting, full turn 30 bar displacement. Permissible ambient temperature: 40 ° C to + 60 ° C. Permissible oil temperature: 15 ° C to + 80 ° C. Dimensions can be changed slightly. The item “2x FLOATING spool 2 Bank Hydraulic Directional Control Valve 11gpm 40L 2x DA” is in sale since Saturday, January 30, 2021. This item is in the category “Business, Office & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Valves & Manifolds\Directional Control Valves\Spool Valves”. The seller is “hydraulic-center” and is located in Torun. This item can be shipped worldwide.

Suitable Media: Oil
Spool Count: 2-Spool
MPN: 02P40 K16K16 GKZ1
Port Diameter: 3/8 inch, 1/2 inch
Valve Operation: Manual
Maximum Pressure: 4500 psi
Brand: Perfect Hydraulic
Maximum Flow Rate: 12 gpm

Comments Off

Tags: 11gpm, bank, control, directional, floating, hydraulic, spool, valve

Categories: floating

3 BANK Hydraulic Directional Control Valve 21gpm 80L 1x Single 2x Double Acting June 26, 2021

3-BANK-Hydraulic-Directional-Control-Valve-21gpm-80L-1x-Single-2x-Double-Acting-01-fux

NOTE: We issue VAT invoices for countries in the European Union. 3 BANK HYDRAULIC MONOBLOCK DIRECTIONAL SPOOL VALVE 2x Double Acting Cylinder 1x Single Acting. Hydraulic distributors are guaranteed for 2 years. It is used in hydraulic systems in agriculture, horticulture, forestry, construction and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, front loaders, construction machines, loaders, excavators, sweepers, industrial machines and for other applications hydraulically controlled. Recommended oil flow in the system: 0-80L / min. Control example: double-acting hydraulic cylinder. Possibility of series connection to the existing system (requires connection of a pressure sleeve). Three-position lever (1-0-2), spring-loaded, ie it moves back into the vertical position. Neutral position 0 (lever up), piston rod of the hydraulic cylinder is stationary – oil overflows. Working position 1 (lever up), the piston rod of the hydraulic cylinder slides out. Working position 2 (lever up), the piston rod of the hydraulic cylinder retracts. Pump supply (P): female thread BSPP 3/4 ” (Sometimes BSPP 1/2″). Return to tank (T). Female thread BSPP 3/4. Output for sections (A, B). Female thread BSPP 1/2. Pressure range Maximum supply pressure: 250 bar. Maximum return pressure: 50 bar. Maximum pressure in sections: 300bar. Bypass valve (safety) set at the factory to 175 bar. Self-adjusting, full turn 30 bar displacement. Permissible ambient temperature: 40 ° C to + 60 ° C. Permissible oil temperature: 15 ° C to + 80 ° C. Dimensions can be changed slightly. The item “3 BANK Hydraulic Directional Control Valve 21gpm 80L 1x Single 2x Double Acting” is in sale since Thursday, February 18, 2021. This item is in the category “Business, Office & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Valves & Manifolds\Directional Control Valves\Spool Valves”. The seller is “hydraulic-center” and is located in Torun. This item can be shipped worldwide.

Suitable Media: Oil
Spool Count: 3-Spool
MPN: 03P80 A1A1C1 GKZ1
Port Diameter: 3/8 inch, 1/2 inch
Valve Operation: Manual
Maximum Pressure: 4500 psi
Brand: Perfect Hydraulic
Maximum Flow Rate: 21 gpm

Comments Off

Tags: 21gpm, acting, bank, control, directional, double, hydraulic, single, valve

Categories: bank

3 BANK Hydraulic Directional Control Valve JOYSTICK 21gpm 80L 3x double acting June 18, 2021

3-BANK-Hydraulic-Directional-Control-Valve-JOYSTICK-21gpm-80L-3x-double-acting-01-ejew

NOTE: We issue VAT invoices for countries in the European Union. HYDRAULIC DISTRIBUTOR 3 SECTION P80 3x Double Acting. CONTROL BY BUILT-IN JOYSTICK. Symbol: 03P80 A1A1A1 + JOY. It is widely used in hydraulic systems in agriculture, horticulture, forestry, construction, and well-known industries. The distributor is adapted to different types of machines, such as B. Agricultural machines, tractors, sprayers, round vehicles, cyclo-loaders, HDS loaders, construction machinery, loaders, excavators, sweepers, industrial machines and other hydraulically controlled devices. Recommended oil flow: 0 – 80 l / min. Example control: two 2-way drives. Possibility of serial connection to the existing system (pressure sleeve required). Joystick with five positions (1 – 2 – 0 – 3 – 4) on the spring, i. Position 0 neutral (joystick positioned vertically) piston rods of both drives are stationary – oil overflows. Working position 1 (joystick lever tilted forward) The piston rod of the first actuator extends. Working position 2 (joystick lever in an inclined position) The piston rod of the first drive is retracted. Working position 3 (joystick lever inclined to the left) The piston rod of the other drive extends. Working position 4 (joystick lever inclined to the right) The piston rod of the other drive is retracted. Return to the tank (T): BSPP 3/4 female thread. Outlet for section (A, B): BSPP 1/2 female thread. Series connection (N): BSPP 3/4 female thread. Maximum pressure on the supply: 250bar. Maximum return pressure: 50 bar. Maximum pressure on the sections: 300 bar. The overflow valve is factory-set to 175 bar. Possibility of self-regulation, full turnover change by 30bar. Dimensions can be changed slightly. The item “3 BANK Hydraulic Directional Control Valve JOYSTICK 21gpm 80L 3x double acting” is in sale since Thursday, February 18, 2021. This item is in the category “Business, Office & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Valves & Manifolds\Directional Control Valves\Spool Valves”. The seller is “hydraulic-center” and is located in Torun. This item can be shipped worldwide.

Suitable Media: Oil
Spool Count: 3-Spool
MPN: 03P80 A1A1A1 + JOY
Port Diameter: 3/8 inch, 1/2 inch
Valve Operation: Manual
Maximum Pressure: 4500 psi
Brand: Perfect Hydraulic
Maximum Flow Rate: 21 gpm

Comments Off

Tags: 21gpm, acting, bank, control, directional, double, hydraulic, joystick, valve

Categories: bank

4 BANK Hydraulic Directional Control Valve 2x JOYSTICK 11gpm 40L 4xdouble acting June 9, 2021

NOTE: We also issue VAT invoices on request. 4 Bank Hydraulic Directional Control Valves 2x JOYSTICK 4 x Double Acting 40L 11gpm. HYDRAULIC DISTRIBUTOR 4 SECTION P40. CONTROL BY BUILT-IN JOYSTICKx2. Symbol: 04P40 A1A1A1A1+ 2x JOY. It is widely used in hydraulic systems in agriculture, horticulture, forestry, construction, and well-known industries. The distributor is adapted to different types of machines, such as B. Agricultural machines, tractors, sprayers, round vehicles, cyclo-loaders, HDS loaders, construction machinery, loaders, excavators, sweepers, industrial machines and other hydraulically controlled devices. Recommended oil flow: 0 – 40 l / min. Example control: two 2-way drives. Possibility of serial connection to the existing system (pressure sleeve required). Joystick with five positions (1 – 2 – 0 – 3 – 4) on the spring, i. Position 0 neutral (joystick positioned vertically) piston rods of both drives are stationary – oil overflows. Working position 1 (joystick lever tilted forward) The piston rod of the first actuator extends. Working position 2 (joystick lever in an inclined position) The piston rod of the first drive is retracted. Working position 3 (joystick lever inclined to the left) The piston rod of the other drive extends. Working position 4 (joystick lever inclined to the right) The piston rod of the other drive is retracted. Pump supply (P1, P2): BSP 1/2 internal thread. Back to the tank (T1, T2): BSP 1/2 internal thread. Sections (A1, A2; B1, B2): BSP 3/8 internal thread. Serial connection (N): BSP 1/2 internal thread. Maximum pressure on the supply: 250bar. Maximum return pressure: 50 bar. Maximum pressure on the sections: 300 bar. The overflow valve is factory-set to 175 bar. Possibility of self-regulation, full turnover change by 30bar. The item “4 BANK Hydraulic Directional Control Valve 2x JOYSTICK 11gpm 40L 4xdouble acting” is in sale since Tuesday, February 2, 2021. This item is in the category “Business, Office & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Valves & Manifolds\Directional Control Valves\Spool Valves”. The seller is “hydraulic-center” and is located in Torun. This item can be shipped worldwide.

Suitable Media: Oil
MPN: 04P40 A1A1A1A1 + 2x JOY
Port Diameter: 3/8 in 1/2 in
Valve Operation: Manual
Brand: Perfect Hydraulic
Maximum Flow Rate: 12 gpm
Spool Count: 4-Spool

Comments Off

Tags: 11gpm, 4xdouble, acting, bank, control, directional, hydraulic, joystick, valve

Categories: bank

January 2025
M	T	W	T	F	S	S
« Dec
		1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30	31