Hydraulic Valve Direction

Hydraulic Proportional Directional Valve DB5195.800 New Unused July 8, 2024

Hydraulic-Proportional-Directional-Valve-DB5195-800-New-Unused-01-ty

Hydraulic Proportional Directional Valve. This number(DB5195.800) is on one of the stacked pieces of this valve. Handle action rests at center position and can be pulled and pushed for two directions and has two wires, with one wire come out each side of the valve. We acquired this unit from a company buyout and we don’t have any more details about it or what equipment it is made for but it’s pretty strait forward in it’s duty. What you see in photo is what you get. If you are looking at it, you know what it is and how much they cost new. I also will be listing a lot of other items in the future, so check out my other auctions. BACK IN TO SERVICE. Check Out My Other Auctions. The item may have flaws and/or defects if this is a used item. You must notify us before returning items.

Comments Off

Tags: db5195800, directional, hydraulic, proportional, unused, valve

Categories: hydraulic

Hydraulic Valve Basics July 7, 2024

Comments Off

Tags: basics, hydraulic, valve

Categories: hydraulic

Hydraulic Directional Double Acting Control Valve, 1 Spool 11GPM SAE Ports Hy July 4, 2024

Hydraulic-Directional-Double-Acting-Control-Valve-1-Spool-11GPM-SAE-Ports-Hy-01-kr

Peculiarity – Equipped with 1 spools 11 GPM hydraulic control valve has the characteristics of small volume, large flow and stable operation. Come with 1 spools and SAE O-ring in/out ports. Inner Check – Hydraulic control valves are used to operate double acting cylinders. High Performance – The hydraulic directional control valve has a relief valve range of up to 3600 PSI and a maximum flow of 11 GPM. There are springs at the bottom of the handles that make the joysticks easy to control. Wide Application – Hydraulic directional control valve is used in agricultural machines tractors sprayers construction machines loaders excavators etc.

Comments Off

Tags: 11gpm, acting, control, directional, double, hydraulic, ports, spool, valve

Categories: hydraulic

Hydraulic 3 Way Steel Diverter Valve, Closed Centre, BSP Ports, DF 3 VIE AP ACC July 3, 2024

Hydraulic-3-Way-Steel-Diverter-Valve-Closed-Centre-BSP-Ports-DF-3-VIE-AP-ACC-01-up

Subscribe to our newsletter to get all the latest and exclusive offers. BELL HOUSING & DRIVE COUPLINGS. PETROL ENGINE ADAPTOR KITS. ELECTRIC MOTOR ADAPTOR KITS. PTO GEARBOX & PUMP ASSEMBLIES. FLOWFIT GM10 90L SPARES. SLICE VALVES – 3/4 BSP PORTS. SLICE VALVES – 3/8 BSP PORTS. FLOWFIT 3/4 160L/MIN VALVES. FLOWFIT 3/8 45L/MIN VALVES. MONOBLOCK VALVES-1/2 BSP PORTS. BUCHER HDM18 & HDM25 SPARES. SLICE VALVES – 1 BSP PORTS. FLOWFIT 1/2 45-90L/MIN VALVES. GALTECH 1/4 15-25L/MIN VALVES. GALTECH 3/8 40-50L/MIN VALVES. MONOBLOCK VALVES-1/4 BSP PORTS. MONOBLOCK VALVES-3/8 BSP PORTS. GALTECH 3/4 120L/MIN VALVES. MONOBLOCK VALVES-3/4 BSP PORTS. GALTECH 1/2 60L/MIN VALVES. BUCHER 3/4 100L/MIN VALVES. GALTECH 1/2 80-90L/MIN VALVES. GALTECH GMV15 & Q15 SPARES. BUCHER 1/2 45-70L/MIN VALVES. BUCHER 3/8 40-45L/MIN VALVES. BUCHER HDM140 & HDM11 SPARES. GALTECH Q80 SLICE VALVES. GALTECH Q75 & Q95 SPARES. SLICE VALVES – 1/2 BSP PORTS. GALTECH Q25 & Q45 SPARES. ELECTRIC MOTORS & DRIVES. AC VARIABLE SPEED DRIVES. HYD QUICK RELEASE COUPLINGS. HYDRAULIC ISO A QRCS. HYDRAULIC FLAT FACE QRCS. PILOT OPERATED CHECK VALVES. RELIEF & SEQUENCE VALVES. 2 PUMP HI-LO UNLOADING VALVES. FLOW CONTROL & DIVIDER VALVES. CETOP 7 SOLENOID VALVES. CETOP 3 SUBPLATES & MANIFOLDS. CETOP 10 SOLENOID VALVES. CETOP 3 MANUAL OPERATED VALVES. CETOP 8 MODULAR SANDWICH VALVE. MODULAR FLOW CONTROL VALVES. CETOP 5 SOLENOID VALVES. CETOP 8 SOLENOID VALVES. CETOP 5 MODULAR SANDWICH VALVE. CETOP 5 MANIFOLDS & SUBPLATES. CETOP 3 SOLENOID VALVES. CETOP 7 MODULAR SANDWICH VALVE. CETOP 3 MODULAR SANDWICH VALVE. HYDRAULIC CYLINDERS / RAMS. TOP LINK STANDARD MOUNT. TOP LINK FIXED MOUNT. TOP LINK AUTOMATIC HITCH. DOUBLE ACTING SPHERICAL ENDS. DOUBLE ACTING LOG SPLITTER. DOUBLE ACTING MICRO CYLINDER. DOUBLE ACTING FIXED PIN HOLES. TANK TOP RETURN FILTERS. LOW PRESSURE INLINE FILTER. HYDRAULIC HOSE & ADAPTORS. HYD ADAPTORS & BONDED SEALS. TEES & CROSS ADAPTORS. MALE x FIXED FEMALE. ADAPTOR AND BONDED SEAL KITS. PLUGS, CAPS & CRIMP NUTS. SWIVEL FEMALE x SWIVEL FEMALE. O’RING FACE SEAL. MALE x SWIVEL FEMALE ADAPTORS. SWEPTS, PUSH-INS & HOSE-TAILS. MALE x MALE ADAPTORS. HAND OPERATED HOSE CRIMPERS. ACCESSORIES FOR HOSE CRIMPERS. HOSE AND TUBE CLEANING. AC PRESSURE & TANK CIRCUIT. BUCHER UP100 AC POWER UNITS. DC MOTOR PUMPS SETS. DC PRESSURE & TANK CIRCUIT. PISTON & VANE PUMPS. GALTECH MULTIPLE GEAR PUMPS. TWO STAGE HI-LOW GEAR PUMPS. TWO STAGE HI-LOW GEAR PUMP KIT. HYD TANKS WITH ACCESSORIES. HI-LOW GEAR PUMP KITS. BELL HOUSING & COUPLINGS. PETROL & DIESEL ENGINES. HONDA ENGINE ADAPTOR KITS. LONCIN ENGINE ADAPTOR KITS. Hydraulic 100mm Rear Gauges. Pneumatic 40mm Rear Gauges. Hydraulic 100mm Base Gauges. Pneumatic 50mm Base Gauges. Hydraulic 63mm Base Gauges. Pneumatic 40mm Base Gauges. Hydraulic 63mm Rear Gauges. Pneumatic 50mm Rear Gauges. PRESSURE GAUGE HOSE TEST KITS. Hydraulic 100mm Test Kits. Hydraulic 63mm Gauge Test Kits. VEHICLE PTO & PUMP KITS. FAAM PTO AND PUMP KITS. LAND ROVER PTO AND PUMP KITS. PEUGEOT PTO AND PUMP KITS. OPEL PTO AND PUMP KITS. KIA PTO AND PUMP KITS. FORD PTO AND PUMP KITS. RENAULT PTO AND PUMP KITS. MAZDA PTO AND PUMP KITS. IVECO PTO AND PUMP KITS. VOLKSWAGEN PTO AND PUMP KITS. VAUXHALL PTO AND PUMP KITS. CITROEN PTO AND PUMP KITS. MERCEDES PTO AND PUMP KITS. MITSUBISHI PTO AND PUMP KITS. FIAT PTO AND PUMP KITS. ISUZU PTO AND PUMP KITS. HYUNDAI PTO AND PUMP KITS. TOYOTA PTO AND PUMP KITS. Otto Weldless Steel Tank, 1/2 Drain C/W Gasket & Plain Lid, Complete Set. Honda 5.5 HP Single Cylinder 4 Stroke Air Cooled Petrol Engine, Recoil Start. Hydraulic 3 Way Steel Diverter Valve, Closed Centre, BSP Ports, DF 3 VIE AP ACC. HYDRAULIC HIGH PRESSURE 3-WAY DIVERTER VALVES, STEEL Body USE AND OPERATION:Diverter flow is used to divert the flow towards two different outlets. Materials and Features:Body: SteelInternal parts: Hardened and ground steel Seals: Buna N standard and anti-extrusion rings Leakage: Minor leakage. Connections: Connect P to the supply, A and B to the ports of the hydraulic circuit where flow has to be diverted to. Withlever in position 1 the flow is connected towards port A; with lever in position 2, the flow is connected towards port B. With lever in central position ports P, A and B are all connected (open centre). HYDRAULIC HIGH PRESSURE 3-WAY DIVERTER VALVES, STEEL Body. Diverter flow is used to divert the flow towards two different outlets. Materials and Features: Body. Hardened and ground steel. Buna N standard and anti-extrusion rings. Connect P to the supply, A and B to the ports of the hydraulic circuit where flow has to be diverted to. Lever in position 1 the flow is connected towards port A; with lever in position 2, the flow is connected towards port B. Hydraulic 3 Way Diverter Valve Open Centre. Hydraulic 3 Way Diverter Valve Closed Centre. Hydraulic 6 Way Diverter Valve Closed Centre. Hydraulic 6 Way Diverter Valve Open Centre. VIEW OUR CUSTOMERS FEEDBACK. I had to ask a dumb question, and they could not have been more helpful. Price good too, and the description including about whether or not these diverter valves are open centre or not. That is hugely important if you want to avoid a wrecked hydraulic pump! Not all sellers tell you that. La livraison a été rapide mais en ouvrant le carton, la cuve était éventrée.

Comments Off

Tags: centre, closed, diverter, hydraulic, ports, steel, valve

Categories: hydraulic

Hydraulic Control Valve Repair Hydraulic Control Valve Rebuild July 2, 2024

Comments Off

Tags: control, hydraulic, rebuild, repair, valve

Categories: hydraulic

Hydraulic Directional Double Acting Control Monoblock Valve, 3 Spool 13GPM SA July 1, 2024

Hydraulic-Directional-Double-Acting-Control-Monoblock-Valve-3-Spool-13GPM-SA-01-nbzb

Hydraulic Directional Double Acting Control Monoblock Valve, 3 Spool 13GPM SAE Ports w/ Joystick Hydraulic Directional Control Valve 3600 PSI Fit for Small Tractors Loaders Etc Specification: Double acting hydraulic valve Spool count: 3 Spool Nominal flow: 13 GPM Relief valve range can reach up to 3600 PSI Inlet Port: SAE 10 Outlet Port: SAE 10 Working Ports: SAE 8 Relief valve: Adjustable Features: – The hydraulic directional control valve is of high tensile strength cast iron monolithic construction – Durable for long service life, stable and reliable performance – The 3 spools 13 GPM hydraulic control valve has the characteristics of small volume, large flow and stable operation – Come with 3 spools and SAE O-ring in/out ports – The hydraulic directional control valve has a relief valve range of up to 3600 PSI and a maximum flow of 13 GPM – Hydraulic directional control valve is used in agricultural machines tractors sprayers construction machines loaders excavators etc Package Includes: 1 x 3 Spool 13GPM Double acting hydraulic directional control valve Durable Quality – The hydraulic directional control valve is of high tensile strength cast iron monolithic construction, durable for long service life, stable and reliable performance. Peculiarity – 3 spools with Joystick control, 13 GPM hydraulic control valve has the characteristics of small volume, large flow and stable operation. Come with 3 spools and SAE O-ring in/out ports. Inner Check – Hydraulic control valves are used to operate double acting cylinders. High Performance – The hydraulic directional control valve has a relief valve range of up to 3600 PSI and a maximum flow of 13 GPM. Wide Application – Hydraulic directional control valve is used in agricultural machines tractors sprayers construction machines loaders excavators etc.

Comments Off

Tags: 13gpm, acting, control, directional, double, hydraulic, monoblock, spool, valve

Categories: hydraulic

4 3 Hydraulic Valve Operation And Maintenance June 30, 2024

Comments Off

Tags: hydraulic, maintenance, operation, valve

Categories: hydraulic

GL Hydraulic Valve/Directional Control Valve / GL 4/2 PW06-20-03-10-10S/180bar June 29, 2024

The parts or Devices were dismantled from functioning production facilities, or. These are unused stock items. Since it has already been in storage for several years, it is expressly offered as “used goods”. Deviations from technical data as well as errors in the description of the item can occur and remain reserved. You will receive an invoice with stated statutory VAT. At F please let us know. With DHL or UPS. GL hydraulic valve Directional valve GL 4/2 PW06-20-03-10-10S 180bar The parts or Devices were dismantled from functioning production facilities, or These are unused stock items, Since it has already been in storage for several years, it is expressly offered as “used goods”.

Comments Off

Tags: control, hydraulic, pw06-20-03-10-10s180bar, valve, valvedirectional

Categories: hydraulic

Hydraulic Cylinder Circuit Speed Control And Intensification June 25, 2024

Comments Off

Tags: circuit, control, cylinder, hydraulic, intensification, speed

Categories: hydraulic

1x for Hydraulic Motors 3 Bank Hydraulic Directional Control Valve 11gpm 40L DA June 24, 2024

1x-for-Hydraulic-Motors-3-Bank-Hydraulic-Directional-Control-Valve-11gpm-40L-DA-01-mt

NOTE: We issue VAT invoices for countries in the European Union. 3 SPOOL HYDRAULIC MONOBLOCK DIRECTIONAL VALVE 2x. Double Acting Cylinder 1x. Distributor with clip for hydraulic motor 03P40 A1A1D8 GKZ1. Hydraulic distributors are guaranteed for 2 years. It is used in hydraulic systems in agriculture, horticulture, forestry, construction and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, front loaders, construction machines, loaders, excavators, sweepers, industrial machines and for other applications hydraulically controlled. The distributor is ideal for controlling a hydraulic motor thanks to a lever with a snap mechanism. You can start the engine and exit the hydraulic distributor without constantly holding the lever. Control example: hydraulic motor in both directions and hydraulic cylinder in two-way operation. Recommended oil flow in the system: 0-40L / min. Hydraulic motor in both directions and hydraulic cylinders in two-way operation. Possibility of series connection to the existing system (requires connection of a pressure sleeve). Three-position lever (1 – 0 – 2), with snap lock, ie it holds the position in the working position. Position 0 neutral (lever in vertical position) Motor or actuator is at a standstill – oil overflows. Position 1 works (lever in diagonal forward position) Motor turns to the left or piston rod extends Position 2 works (lever in diagonal reverse position) The motor turns to the right or the piston rod of the actuator retracts. Pump supply (P): female thread BSP 1/2. Return to tank (T). Female thread BSP 1/2. Output for sections (A, B). Female thread BSP 3/8. Pressure range Maximum supply pressure: 250 bar. Maximum return pressure: 50 bar. Maximum pressure in sections: 300bar. Bypass valve (safety) set at the factory to 175 bar. Self-adjusting, full turn 30 bar displacement. Permissible ambient temperature: 40 ° C to + 60 ° C. Permissible oil temperature: 15 ° C to + 80 ° C. Dimensions can be changed slightly.

Comments Off

Tags: 11gpm, bank, control, directional, hydraulic, motors, valve

Categories: hydraulic

May 2025
M	T	W	T	F	S	S
« Apr
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31