Hydraulic Valve Direction

1x Single 2 Bank Hydraulic Directional Control Valves JOYSTICK 1x DA 40L 11gpm July 15, 2021

NOTE: We also issue VAT invoices on request. 1x Single Acting 2 Bank Hydraulic Directional Control Valves JOYSTICK 1xDA 40L 11gpm. HYDRAULIC DISTRIBUTOR 2 SECTION P40 1 xSA 1xDA. CONTROL BY BUILT-IN JOYSTICK. Symbol: 02P40 A1C1 + JOY. It is widely used in hydraulic systems in agriculture, horticulture, forestry, construction, and well-known industries. The distributor is adapted to different types of machines, such as B. Agricultural machines, tractors, sprayers, round vehicles, cyclo-loaders, HDS loaders, construction machinery, loaders, excavators, sweepers, industrial machines and other hydraulically controlled devices. Recommended oil flow: 0 – 40 l / min. Example control: two 2-way drives. Possibility of serial connection to the existing system (pressure sleeve required). Joystick with five positions (1 – 2 – 0 – 3 – 4) on the spring, i. Position 0 neutral (joystick positioned vertically) piston rods of both drives are stationary – oil overflows. Working position 1 (joystick lever tilted forward) The piston rod of the first actuator extends. Working position 2 (joystick lever in an inclined position) The piston rod of the first drive is retracted. Working position 3 (joystick lever inclined to the left) The piston rod of the other drive extends. Working position 4 (joystick lever inclined to the right) The piston rod of the other drive is retracted. Pump supply (P1, P2): BSP 1/2 internal thread. Back to the tank (T1, T2): BSP 1/2 internal thread. Sections (A1, A2; B1, B2): BSP 3/8 internal thread. Serial connection (N): BSP 1/2 internal thread. Maximum pressure on the supply: 250bar. Maximum return pressure: 50 bar. Maximum pressure on the sections: 300 bar. The overflow valve is factory-set to 175 bar. Possibility of self-regulation, full turnover change by 30bar. The item “1x Single 2 Bank Hydraulic Directional Control Valves JOYSTICK 1x DA 40L 11gpm” is in sale since Tuesday, February 2, 2021. This item is in the category “Business, Office & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Valves & Manifolds\Directional Control Valves\Spool Valves”. The seller is “hydraulic-center” and is located in Torun. This item can be shipped worldwide.

Suitable Media: Oil
Spool Count: 2-Spool
MPN: 02P40 A1C1 + JOY
Port Diameter: 3/8 in 1/2 in
Valve Operation: Manual
Brand: Perfect Hydraulic
Maximum Flow Rate: 12 gpm

Comments Off

Tags: 11gpm, bank, control, directional, hydraulic, joystick, single, valves

Categories: single

1x for Hydraulic Motors 4 Bank Hydraulic Directional Control Valve 11gpm 40L DA July 1, 2021

1x-for-Hydraulic-Motors-4-Bank-Hydraulic-Directional-Control-Valve-11gpm-40L-DA-01-df

NOTE: We issue VAT invoices for countries in the European Union. 4 SPOOL HYDRAULIC MONOBLOCK DIRECTIONAL VALVE 3x. Double Acting Cylinder 1x. Distributor with clip for hydraulic motor 04P40 A1A1A1D8 GKZ1. Hydraulic distributors are guaranteed for 2 years. It is used in hydraulic systems in agriculture, horticulture, forestry, construction and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, front loaders, construction machines, loaders, excavators, sweepers, industrial machines and for other applications hydraulically controlled. The distributor is ideal for controlling a hydraulic motor thanks to a lever with a snap mechanism. You can start the engine and exit the hydraulic distributor without constantly holding the lever. Control example: hydraulic motor in both directions and hydraulic cylinder in two-way operation. Recommended oil flow in the system: 0-40L / min. Hydraulic motor in both directions and hydraulic cylinders in two-way operation. Possibility of series connection to the existing system (requires connection of a pressure sleeve). Three-position lever (1 – 0 – 2), with snap lock, ie it holds the position in the working position. Position 0 neutral (lever in vertical position) Motor or actuator is at a standstill – oil overflows. Position 1 works (lever in diagonal forward position) Motor turns to the left or piston rod extends Position 2 works (lever in diagonal reverse position) The motor turns to the right or the piston rod of the actuator retracts. Pump supply (P): female thread BSP 1/2. Return to tank (T). Female thread BSP 1/2. Output for sections (A, B). Female thread BSP 3/8. Pressure range Maximum supply pressure: 250 bar. Maximum return pressure: 50 bar. Maximum pressure in sections: 300bar. Bypass valve (safety) set at the factory to 175 bar. Self-adjusting, full turn 30 bar displacement. Permissible ambient temperature: 40 ° C to + 60 ° C. Permissible oil temperature: 15 ° C to + 80 ° C. Dimensions can be changed slightly. The item “1x for Hydraulic Motors 4 Bank Hydraulic Directional Control Valve 11gpm 40L DA” is in sale since Sunday, January 31, 2021. This item is in the category “Business, Office & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Valves & Manifolds\Directional Control Valves\Spool Valves”. The seller is “hydraulic-center” and is located in Torun. This item can be shipped worldwide.

Suitable Media: Oil
Spool Count: 4-Spool
MPN: 04P40 A1A1A1D8 GKZ1
Port Diameter: 3/8 inch, 1/2 inch
Valve Operation: Manual
Maximum Pressure: 4500 psi
Brand: Perfect Hydraulic
Maximum Flow Rate: 12 gpm

Comments Off

Tags: 11gpm, bank, control, directional, hydraulic, motors, valve

Categories: hydraulic

2x FLOATING spool 2 Bank Hydraulic Directional Control Valve 11gpm 40L 2x DA June 27, 2021

2x-FLOATING-spool-2-Bank-Hydraulic-Directional-Control-Valve-11gpm-40L-2x-DA-01-bp

NOTE: We issue VAT invoices for countries in the European Union. 2 Spool Hydraulic Directional Control Valve 11gpm 40L 2. X FLOATING Double Acting. 1x Double Acting Cylinder DA. Hydraulic distributors are guaranteed for 2 years. It is used in hydraulic systems in agriculture, horticulture, forestry, construction and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, front loaders, construction machines, loaders, excavators, sweepers, industrial machines and for other applications hydraulically controlled. Recommended oil flow in the system: 0-40L / min. Control example: double-acting hydraulic cylinder. Possibility of series connection to the existing system (requires connection of a pressure sleeve). Three-position lever (1-0-2), spring-loaded, ie it moves back into the vertical position. Neutral position 0 (lever up), piston rod of the hydraulic cylinder is stationary – oil overflows. Working position 1 (lever up), the piston rod of the hydraulic cylinder slides out. Working position 2 (lever up), the piston rod of the hydraulic cylinder retracts. Pump supply (P): female thread BSP 1/2. Return to tank (T). Female thread BSP 1/2. Output for sections (A, B). Female thread BSP 3/8. Pressure range Maximum supply pressure: 250 bar. Maximum return pressure: 50 bar. Maximum pressure in sections: 300bar. Bypass valve (safety) set at the factory to 175 bar. Self-adjusting, full turn 30 bar displacement. Permissible ambient temperature: 40 ° C to + 60 ° C. Permissible oil temperature: 15 ° C to + 80 ° C. Dimensions can be changed slightly. The item “2x FLOATING spool 2 Bank Hydraulic Directional Control Valve 11gpm 40L 2x DA” is in sale since Saturday, January 30, 2021. This item is in the category “Business, Office & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Valves & Manifolds\Directional Control Valves\Spool Valves”. The seller is “hydraulic-center” and is located in Torun. This item can be shipped worldwide.

Suitable Media: Oil
Spool Count: 2-Spool
MPN: 02P40 K16K16 GKZ1
Port Diameter: 3/8 inch, 1/2 inch
Valve Operation: Manual
Maximum Pressure: 4500 psi
Brand: Perfect Hydraulic
Maximum Flow Rate: 12 gpm

Comments Off

Tags: 11gpm, bank, control, directional, floating, hydraulic, spool, valve

Categories: floating

5 Spool Hydraulic Directional Control Valve 11gpm 40L Double Acting Cylinder DA June 26, 2021

5-Spool-Hydraulic-Directional-Control-Valve-11gpm-40L-Double-Acting-Cylinder-DA-01-th

NOTE: We issue VAT invoices for countries in the European Union. We sell wholesal e. 5 Spool Hydraulic Directional Control Valve 11gpm 40L Double Acting Cylinder DA. Hydraulic distributors are guaranteed for 2 years. It is used in hydraulic systems in agriculture, horticulture, forestry, construction and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, front loaders, construction machines, loaders, excavators, sweepers, industrial machines and for other applications hydraulically controlled. Recommended oil flow in the system: 0-40L / min. Control example: double-acting hydraulic cylinder. Possibility of series connection to the existing system (requires connection of a pressure sleeve). Three-position lever (1-0-2), spring-loaded, ie it moves back into the vertical position. Neutral position 0 (lever up), piston rod of the hydraulic cylinder is stationary – oil overflows. Working position 1 (lever up), the piston rod of the hydraulic cylinder slides out. Working position 2 (lever up), the piston rod of the hydraulic cylinder retracts. Pump supply (P): female thread BSP 1/2. Return to tank (T). Female thread BSP 1/2. Output for sections (A, B). Female thread BSP 3/8. Pressure range Maximum supply pressure: 250 bar. Maximum return pressure: 50 bar. Maximum pressure in sections: 300bar. Bypass valve (safety) set at the factory to 175 bar. Self-adjusting, full turn 30 bar displacement. Permissible ambient temperature: 40 ° C to + 60 ° C. Permissible oil temperature: 15 ° C to + 80 ° C. Dimensions can be changed slightly. The item “5 Spool Hydraulic Directional Control Valve 11gpm 40L Double Acting Cylinder DA” is in sale since Friday, January 15, 2021. This item is in the category “Business, Office & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Valves & Manifolds\Directional Control Valves\Spool Valves”. The seller is “hydraulic-center” and is located in Torun. This item can be shipped worldwide.

Suitable Media: Oil
MPN: 05P40 5xA1 GKZ1
Port Diameter: 3/8 inch, 1/2 inch
Valve Operation: Manual
Maximum Pressure: 4500 psi
Brand: Perfect Hydraulic
Maximum Flow Rate: 12 gpm
Spool Count: 5-Spool

Comments Off

Tags: 11gpm, acting, control, cylinder, directional, double, hydraulic, spool, valve

Categories: spool

6 Spool Hydraulic Directional Control Valve 11gpm 40L Double Acting Cylinder DA June 21, 2021

6-Spool-Hydraulic-Directional-Control-Valve-11gpm-40L-Double-Acting-Cylinder-DA-01-sque

NOTE: We issue VAT invoices for countries in the European Union. We sell wholesal e. 6 Spool Hydraulic Directional Control Valve 11gpm 40L Double Acting Cylinder DA. Hydraulic distributors are guaranteed for 2 years. It is used in hydraulic systems in agriculture, horticulture, forestry, construction and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, front loaders, construction machines, loaders, excavators, sweepers, industrial machines and for other applications hydraulically controlled. Recommended oil flow in the system: 0-40L / min. Control example: double-acting hydraulic cylinder. Possibility of series connection to the existing system (requires connection of a pressure sleeve). Three-position lever (1-0-2), spring-loaded, ie it moves back into the vertical position. Neutral position 0 (lever up), piston rod of the hydraulic cylinder is stationary – oil overflows. Working position 1 (lever up), the piston rod of the hydraulic cylinder slides out. Working position 2 (lever up), the piston rod of the hydraulic cylinder retracts. Pump supply (P): female thread BSP 1/2. Return to tank (T). Female thread BSP 1/2. Output for sections (A, B). Female thread BSP 3/8. Pressure range Maximum supply pressure: 250 bar. Maximum return pressure: 50 bar. Maximum pressure in sections: 300bar. Bypass valve (safety) set at the factory to 175 bar. Self-adjusting, full turn 30 bar displacement. Permissible ambient temperature: 40 ° C to + 60 ° C. Permissible oil temperature: 15 ° C to + 80 ° C. Dimensions can be changed slightly. The item “6 Spool Hydraulic Directional Control Valve 11gpm 40L Double Acting Cylinder DA” is in sale since Friday, January 15, 2021. This item is in the category “Business, Office & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Valves & Manifolds\Directional Control Valves\Spool Valves”. The seller is “hydraulic-center” and is located in Torun. This item can be shipped worldwide.

Suitable Media: Oil
MPN: 06P40 6xA1 GKZ1
Port Diameter: 3/8 inch, 1/2 inch
Valve Operation: Manual
Maximum Pressure: 4500 psi
Brand: Perfect Hydraulic
Maximum Flow Rate: 12 gpm
Spool Count: 6-Spool

Comments Off

Tags: 11gpm, acting, control, cylinder, directional, double, hydraulic, spool, valve

Categories: spool

Hydraulic directional control valve 11gpm/ 40lpm, double acting cylinder spools June 17, 2021

Hydraulic directional control valve 11gpm/ 40lpm, double acting cylinder spools. Hydraulic directional control valve P40 series Specifications – Max operating pressure P=3600psi (250bar); T= 150psi (10 bar); A , B = 4300psi (300 bar) – Nominal flow 11gpm (40l/min) – Open center system (pump-to-tank flow) – Adjustable relief valve – A, B ports 3/8? BSPP (British Standard Parallel Pipe, not NPT) – P, T, N port 1/2? Hydraulic directional control valve P40 series. Max operating pressure P=3600psi (250bar); T= 150psi (10 bar); A , B = 4300psi (300 bar). Nominal flow 11gpm (40l/min). Open center system (pump-to-tank flow). Adjustable relief valve. A, B ports 3/8? BSPP (British Standard Parallel Pipe, not NPT). P, T, N port 1/2? In standard execution all spools are double acting with spring return to neutral position. Specify if you need additional options as follows (by extra costs). Special spools or spool controls (table 5 and 6). Joystick, pneumatic or cable control. High pressure carry over/ power beyond, closed center plug. Adapters BSP/NPT or BSP/JIC etc. Sorry, our items are NOT available for pick-up. No additional information at this time. You might also like. Remote control cable IT-3056/ IT-731133 for hydraulic spool valve. BOSCH REXROTH hydraulic axial piston fixed pump A17FO063/10NLWK0E81-0 R902162394. HYDRAULIC COMPACT DOUBLE PILOT OPERATED CHECK VALVE 3/8 BSP 5GPM 4350psi V0114. BOSCH REXROTH hydraulic pump A17FO080/10NLWK0E81-0 R902162396. The item “Hydraulic directional control valve 11gpm/ 40lpm, double acting cylinder spools” is in sale since Thursday, September 17, 2020. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Parts & Accessories\Hydraulics”. The seller is “arshydro” and is located in Vantaa, Uusimaa. This item can be shipped worldwide.

Brand: Badestnost

Comments Off

Tags: 11gpm, 40lpm, acting, control, cylinder, directional, double, hydraulic, spools, valve

Categories: hydraulic

4 BANK Hydraulic Directional Control Valve 2x JOYSTICK 11gpm 40L 4xdouble acting June 9, 2021

NOTE: We also issue VAT invoices on request. 4 Bank Hydraulic Directional Control Valves 2x JOYSTICK 4 x Double Acting 40L 11gpm. HYDRAULIC DISTRIBUTOR 4 SECTION P40. CONTROL BY BUILT-IN JOYSTICKx2. Symbol: 04P40 A1A1A1A1+ 2x JOY. It is widely used in hydraulic systems in agriculture, horticulture, forestry, construction, and well-known industries. The distributor is adapted to different types of machines, such as B. Agricultural machines, tractors, sprayers, round vehicles, cyclo-loaders, HDS loaders, construction machinery, loaders, excavators, sweepers, industrial machines and other hydraulically controlled devices. Recommended oil flow: 0 – 40 l / min. Example control: two 2-way drives. Possibility of serial connection to the existing system (pressure sleeve required). Joystick with five positions (1 – 2 – 0 – 3 – 4) on the spring, i. Position 0 neutral (joystick positioned vertically) piston rods of both drives are stationary – oil overflows. Working position 1 (joystick lever tilted forward) The piston rod of the first actuator extends. Working position 2 (joystick lever in an inclined position) The piston rod of the first drive is retracted. Working position 3 (joystick lever inclined to the left) The piston rod of the other drive extends. Working position 4 (joystick lever inclined to the right) The piston rod of the other drive is retracted. Pump supply (P1, P2): BSP 1/2 internal thread. Back to the tank (T1, T2): BSP 1/2 internal thread. Sections (A1, A2; B1, B2): BSP 3/8 internal thread. Serial connection (N): BSP 1/2 internal thread. Maximum pressure on the supply: 250bar. Maximum return pressure: 50 bar. Maximum pressure on the sections: 300 bar. The overflow valve is factory-set to 175 bar. Possibility of self-regulation, full turnover change by 30bar. The item “4 BANK Hydraulic Directional Control Valve 2x JOYSTICK 11gpm 40L 4xdouble acting” is in sale since Tuesday, February 2, 2021. This item is in the category “Business, Office & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Valves & Manifolds\Directional Control Valves\Spool Valves”. The seller is “hydraulic-center” and is located in Torun. This item can be shipped worldwide.

Suitable Media: Oil
MPN: 04P40 A1A1A1A1 + 2x JOY
Port Diameter: 3/8 in 1/2 in
Valve Operation: Manual
Brand: Perfect Hydraulic
Maximum Flow Rate: 12 gpm
Spool Count: 4-Spool

Comments Off

Tags: 11gpm, 4xdouble, acting, bank, control, directional, hydraulic, joystick, valve

Categories: bank

7 Bank Hydraulic Directional Control Valve 11gpm 40L Double Acting Cylinder DA

NOTE: We issue VAT invoices for countries in the European Union. We sell wholesal e. 7 Spool Hydraulic Directional Control Valve 11gpm 40L Double Acting Cylinder DA. Hydraulic distributors are guaranteed for 2 years. It is used in hydraulic systems in agriculture, horticulture, forestry, construction and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, front loaders, construction machines, loaders, excavators, sweepers, industrial machines and for other applications hydraulically controlled. Recommended oil flow in the system: 0-40L / min. Control example: double-acting hydraulic cylinder. Possibility of series connection to the existing system (requires connection of a pressure sleeve). Three-position lever (1-0-2), spring-loaded, ie it moves back into the vertical position. Neutral position 0 (lever up), piston rod of the hydraulic cylinder is stationary – oil overflows. Working position 1 (lever up), the piston rod of the hydraulic cylinder slides out. Working position 2 (lever up), the piston rod of the hydraulic cylinder retracts. Pump supply (P): female thread BSP 1/2. Return to tank (T). Female thread BSP 1/2. Output for sections (A, B). Female thread BSP 3/8. Pressure range Maximum supply pressure: 250 bar. Maximum return pressure: 50 bar. Maximum pressure in sections: 300bar. Bypass valve (safety) set at the factory to 175 bar. Self-adjusting, full turn 30 bar displacement. Permissible ambient temperature: 40 ° C to + 60 ° C. Permissible oil temperature: 15 ° C to + 80 ° C. Dimensions can be changed slightly. The item “7 Bank Hydraulic Directional Control Valve 11gpm 40L Double Acting Cylinder DA” is in sale since Tuesday, January 19, 2021. This item is in the category “Business, Office & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Valves & Manifolds\Directional Control Valves\Spool Valves”. The seller is “hydraulic-center” and is located in Torun. This item can be shipped worldwide.

Suitable Media: Oil
Spool Count: 7-Spool
MPN: 07P40 7xA1 GKZ1
Port Diameter: 3/8 inch, 1/2 inch
Valve Operation: Manual
Maximum Pressure: 4500 psi
Brand: Perfect Hydraulic
Maximum Flow Rate: 12 gpm

Comments Off

Tags: 11gpm, acting, bank, control, cylinder, directional, double, hydraulic, valve

Categories: bank

5 Spool Hydraulic Directional Control Valve 2x JOYSTICK 11gpm 40L 5x Double 5xDA June 2, 2021

NOTE: We issue VAT invoices for countries in the European Union. HYDRAULIC DISTRIBUTOR 5 SECTION P40 5x Double Acting. CONTROL BY BUILT-IN JOYSTICKx2. Symbol: 05P40 5xA1 + 2x JOY. It is widely used in hydraulic systems in agriculture, horticulture, forestry, construction, and well-known industries. The distributor is adapted to different types of machines, such as B. Agricultural machines, tractors, sprayers, round vehicles, cyclo-loaders, HDS loaders, construction machinery, loaders, excavators, sweepers, industrial machines and other hydraulically controlled devices. Recommended oil flow: 0 – 40 l / min. Example control: two 2-way drives. Possibility of serial connection to the existing system (pressure sleeve required). Joystick with five positions (1 – 2 – 0 – 3 – 4) on the spring, i. Position 0 neutral (joystick positioned vertically) piston rods of both drives are stationary – oil overflows. Working position 1 (joystick lever tilted forward) The piston rod of the first actuator extends. Working position 2 (joystick lever in an inclined position) The piston rod of the first drive is retracted. Working position 3 (joystick lever inclined to the left) The piston rod of the other drive extends. Working position 4 (joystick lever inclined to the right) The piston rod of the other drive is retracted. Pump supply (P1, P2): BSP 1/2 internal thread. Back to the tank (T1, T2): BSP 1/2 internal thread. Sections (A1, A2; B1, B2): BSP 3/8 internal thread. Serial connection (N): BSP 1/2 internal thread. Maximum pressure on the supply: 250bar. Maximum return pressure: 50 bar. Maximum pressure on the sections: 300 bar. The overflow valve is factory-set to 175 bar. Possibility of self-regulation, full turnover change by 30bar. The item “5 Spool Hydraulic Directional Control Valve 2x JOYSTICK 11gpm 40L 5x Double 5xDA” is in sale since Tuesday, February 2, 2021. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Valves & Manifolds\Directional Control Valves\Spool Valves”. The seller is “hydraulic-center” and is located in Torun. This item can be shipped worldwide.

Suitable Media: Oil
Spool Count: 5-Spool
MPN: 05P40 5xA1 + 2x JOY
Port Diameter: 3/8 in 1/2 in
Valve Operation: Manual
Brand: Perfect Hydraulic
Maximum Flow Rate: 12 gpm

Comments Off

Tags: 11gpm, 5xda, control, directional, double, hydraulic, joystick, spool, valve

Categories: spool

2 Spool Hydraulic Directional Control Valve 11gpm Double Acting Cylinder 40L/min May 28, 2021

2-Spool-Hydraulic-Directional-Control-Valve-11gpm-Double-Acting-Cylinder-40L-min-01-aa

You may also like. 2 Spool Hydraulic Directional Control Valve 11gpm Double Acting Cylinder 40L/min. Name:P40 2 spool hydraulic valve. Control valve switch (can control the number of cylinders):2. Greatest pressure:31.5MPa. A, B, P, T, N ports:1/2BSPP. Range of working temperature:-20°C+80°C. Working fluid viscosity range:10400mm2/S. The valve body is integrally cast from forging. The maximum pressure is 31.5MPa and the maximum flow is 40L/min. Has the function of regulating pressure. With anti-hydraulic backflow, reversing valve function. The hydraulic valve has good sealing performance. The valve body is integrally casted by forging, which has good sealing performance and does not leak oil. It has the function of regulating the pressure, preventing the oil from flowing backward and reversing. Operate with a reversing handle for parallel or series oil circuits. Widely used in forklifts, small factory machinery, small agricultural machinery, small hydraulic presses, punching machines, and other processing equipment. More choices available(please leave a message if you need other models). Idely used in forklifts, small factory machinery, small agricultural machinery, small hydraulic presses, punching machines, and other processing equipment. 1PC 2 Spool Hydraulic Valve. Note:To ensure that the multi-way valve connection is right, to ensure the cleanliness of the hydraulic oil, the connection line drop can not be too large. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Siemens, Fagor CNC machine parts and accessories, Engraving & milling solutions, spindle motor with. VFD kits, servo motor and servo drive kits, stepper motor and stepper drive kits, ball screw, linear guide. Rail, 3D printer parts, etc. If you need any Industrial parts or repairs, welcome to contact me, we will try our best to help you. Due to time zones, our reply to your questions may not be immediately. But within above working time, we w. If it’s non-workdays, please kindly be patient and wait till Monday. The item “2 Spool Hydraulic Directional Control Valve 11gpm Double Acting Cylinder 40L/min” is in sale since Tuesday, January 12, 2021. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Valves & Manifolds\Other Valves & Manifolds”. The seller is “vipwindows_139″ and is located in Shenzhen. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Mexico, Australia.

Brand: ToAuto
MPN: Does Not Apply
Model: SG-P40-2
Control valve switch: 2
Nominal pressure: 20MPa
Greatest pressure: 31.5MPa
Maximum flow: 40L/min
Back pressure: 1MPa
Range of working temperature: -20°C~+80°C
Working fluid viscosity range: 10~400mm2/S
Filtration accuracy: 10um

Comments Off

Tags: 11gpm, 40lmin, acting, control, cylinder, directional, double, hydraulic, spool, valve

Categories: spool

April 2026
M	T	W	T	F	S	S
« Mar
		1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30